Hello.
Link doesn't work. it should be http://oleg.wl500g.info/1.9.2.7-6c-pre5/
Engy
Well, this happened today... I've uploaded prerelease for wide testing. Use on your own risk as usual. The brief list of changes is as following:
- samba large writes
- pppoe ac name, service name
- default gateway with non-local address
- busybox-1.01 (+new applets)
- dropbear-0.46
- flashfs backup (engy)
- firewall internal 80 wan accept (engy)
- pppoe nomppe nomppc
- nat/24 (techno report)
- poweroff is working
- hidden page enter key fix (engy)
- System Setup | Services Page
- samba cp1251
- url filter removed
- kernel-syn-recv.patch (oleo)
- new firewall rules layout (unaiur)
The firmware was not carefully tested, so probably it will not work at all. Anyway, if you brave enough, here is the link.
Try it and let me know of bugs found compared to 1.9.2.7-6b.
Once again: this is a pre-release with alpha level quality.
Last edited by Oleg; 12-10-2005 at 08:10.
Hello.
Link doesn't work. it should be http://oleg.wl500g.info/1.9.2.7-6c-pre5/
Engy
Corrected, thanks.
Christmas in October! Thx.
is it possible to put the url filter in there again. i used it to block bad sites.
thnx,
Ed
URL filter never worked with custom firmware. Use Internet Explorer to filter sites.
o i didn't know that. i thought it worked.
But the router is much quicker now with the the latest custom firmware.
is there an other possibility to block sites in the router. otherwise i have to config 10 pc's.
minor: in main window of setting & flashfs management still "Man.gement"
what can you do with flashfs management?
can you load modules here?
firmware worked fine! Thanks Oleg!
flashfs in detail is decribed on the http://oleg.wl500g.info/ . It's used to store small files permanently.Originally Posted by alien433
Hi Oleg!
Thank You for Your new firmware release. I'd try this, and I think it's correct. Some idea: I'm a hungarian user, and I need the 852/2 codepage for the Samba, because the long filenames is wrong on my pendrive (and the Hungarian Time Zone is too (time.kfki.hu).
What You thinking from this?
Sorry From My Wrong English, and Thank You For Your Help!
Best Regards:
zitev from Hungary
...Ahhhh I see, sorry for My stupid question with time zone. My time server (time.kfki.hu) is installable, and I setup the (GMT+1.00) Czech Republic... for my time zone....but I need the 852 codepage
THX!
zitev
I also have no problems with ver. 6c-pre5, good work, Oleg. Thanks.
Is there a simple way to upgrade if I boot from USB disk?
Erasing the USB disk, copying the new FS and reinstalling all additional software would be a lot of work :-(
TIA
Martin
P.S. I know this is an alpha release, but sometime I will have to upgrade...