ping on asus

[przeniek]

Hello,

my wl500g is conected to net behind other router. I'll conected lan with internet to lan1 and on wireless and other lan(2-4) I've internet - this works great and this is't problem...

problem is - I don't hane internet on wl500g - I try to ping from telnet and then I see "unknow host" for any host from internet ... I see form wl500g (192.168.1.25) router connetcted to internet (192.168.1.1) and other local host but is't any host before router 192.168.1.1

any sugestion??

[Antiloop]

Hello,

my wl500g is conected to net behind other router. I'll conected lan with internet to lan1 and on wireless and other lan(2-4) I've internet - this works great and this is't problem...

problem is - I don't hane internet on wl500g - I try to ping from telnet and then I see "unknow host" for any host from internet ... I see form wl500g (192.168.1.25) router connetcted to internet (192.168.1.1) and other local host but is't any host before router 192.168.1.1

any sugestion??

your configuration is not clear to me, please draw your configuration (use Microsoft Visio if possible or paint)

also note all IP adresses used

[pfugl]

Sounds like a DNS problem. Have you tried to ping from the wl500g with an ip address instead of a host name? If this works, I suggest checking that your DNS server is set the same on the wl500 as on the working systems.

[przeniek]

I think not...
When I ping etc. 66.249.93.104 (google.com) I recive "Host Unreachable".

[przeniek]

This is topology of my network:



Units in red has internet connetction. But WL500G not...
Maybe is little complicated.. but it works.
Router is DSL-604T and CLIENT is DWL2000AP+

[Antiloop]

This is topology of my network:



Units in red has internet connetction. But WL500G not...
Maybe is little complicated.. but it works.
Router is DSL-604T and CLIENT is DWL2000AP+

everything seems to be in the same subnet

is the WL500g in AP mode or in ROUTER/GATEWAY mode ?

[Rynno]

It´s not complicated,
192.168.1.100-101 are connected at LAN2 and WIFI

WL500g is connected to the client 192.168.1.50 at LAN1
so.... you are only using the router as a switch.
The WL500g itself would try to connect through the WAN for an internet connection.
The WAN isn´t connected...
Try hooking up the WAN port to the client 192.168.1.50
Then setup the WL500g as a bridge or use another setting, should work.
(I guess)

Another question, why should the WL500g be able to connect to the internet by itself?

[przeniek]

everything seems to be in the same subnet

yes - 255.255.255.0

is the WL500g in AP mode or in ROUTER/GATEWAY mode ?

Operation Mode of wl500g is ROUTER

When I connect CLIENT to WAN port of course on wl500g i've internet on them... but on 192.168.1.100, 192.168.1.101... not...
When I reboot wl500g for a seconds I've internet connetion on end host.. but a moment later not...

[przeniek]

Another question, why should the WL500g be able to connect to the internet by itself?

Because router connected to internet is in other home I and my neighborhood want to have wlan on both homes separatly... and WDS is to slow...

[Rynno]

Maybe you could setup the gateway of the WL500g to 192.168.1.50
But why don't you connect the WAN port to the client 192.168.1.50
instead of the LAN1 port?

[przeniek]

But why don't you connect the WAN port to the client 192.168.1.50
instead of the LAN1 port?

When I connect client to WAN a I've internet on wl500g but on host connected to wl500g don't....

[przeniek]

I discover conflict between DHCP server in my lan... One to more
Servers set difrent geteways...

thanks all for advice and help