Currently I am using "WLHDD-220.127.116.11-9-USB-1.71.trx" for my WLHDD device for a long time(2 years),
It quite good for e169U 3.5G/HSDPA usb modem to internet accessing, while I am in outdoors.
For some reasons I need recompiling/custom firmware and upgrade kernel ver,
but so far the 18.104.22.168-10(kernel 2.4.20.XX) does no longer support original WL-500g/b/bv2/WL-300g/WL-HDD units(hardware vendor no longer support BCM4702 CPU).
And the new branch of 22.214.171.124-d(kernel 2.4.37) or 126.96.36.199-rtn(kernel 2.6.22) does not support WLHDD(BCM4702/BCM5325M) also.
I try to modify/um-remark root directory (in gateway) "Makefile" of 188.8.131.52-10 as below lines:
After "make ; make install" process, it builds "WLHDD-184.108.40.206-10.trx" without problems.
unfortunately WLHDD(BCM4702/4MB flash/16MB SDR 32bit) seems doesn't work for new TRX file.
BTW, this new "WLHDD-220.127.116.11-10.trx" does work in WL-520gu(BCM5354/4MB flash/16MB SDR 16bit) very well.
Would please someone gives hints or ideals to tell me how to porting 18.104.22.168-10 or 22.214.171.124-d/126.96.36.199-rtn to WLHDD?
Should I modify "shared/boot.S" or "shared/sbsdram.S", or other SFR setting,
Or to update driver OBJ form Broadcom.???
Have a NICE day,
Eric Apr 27,2011