I 2nd that request!
I 2nd that request!
I third that rqeuest, with a few instructions too if that's possible.
I find It here http://download.hezik.nl/WL700gE/Ope...0-%20Test%20-/
I have succesfully flashed Bacfire image onto my WL700, but I can not fid a way to change root to hdd :-(
Though I can see both partitions mounted
/dev/hda1 to /mnt/hda1
/dev/hda3 to /mnt/hda3
The script I used on kamikaze (root2sh) isn't here.
I tried to use the pivot_root but I do not know which parameters should I issue to make it work.
I have even tried "brute" method of copying /rom to /mnt/hda1 and trying to modify /etc/config/fstab to make it boot from hda1 instead of /dev/sha1 which is default (and probably even disaled), 'uci show fstab' seems ok, 'uci commit' as well, but on reboot I am back or rom :-(
Please advise.
Thanks a lot in advance.
Have you tried that image? I think it might be too big? I found some pages saying that they had trouble flashing any image over about 1.8MB:
https://forum.openwrt.org/viewtopic.php?id=25699
There was another image mentioned here:
http://www.ipvvi.net/?p=294
but it was unavailable. Its supposed to include the pivot root to HDD. I just checked again and was able to download the 1.6MB image. I hope someone more knowledgable than me can try it and see if it works.
(I have a WLHDD that I was able to get running Olegs firmware - thanks to the excellent tutorials. But information for getting backfire on the WL700ge is too patchy for my skills)
Please let me know how it works
Thanks in advance.
By the way, there is a new Linux kernel version available: 3.X.X. Somebody wants to give it a try?