Firmware v1.9.4.0 BETA

[tomilius]

I just use Dynamic DNS... I'm not sure if the others work or not. You can't use Dynamic DNS, right? I'd probably create a free Dynamic DNS subdomain and see if that works... That works for me. Isn't there some way you can redirect your custom/static domain to the free one anyway, worst case?

[Ascathôn]

If I choose for dynamic, I have to check the dyndns.org website at least every month. Or else the hostname and my account get deactivated. My IP is dynamic, but it is possible to have the same IP for a whole year. It (most of the times) only changes when my ISP is working on their systems.

It would be nice if dyndns let's me forward the hostname to the hostname given to me by my ISP. Because that's the only thing which is static. But as far as I know dyndns doesn't let me.

[int]

Dynamic-DNS in free www.dyndns.org are working well, only are more slow to update ip, some 10 seconds more, that others firmware..

with this firmware the router startup more fast that others firmware..

edit2: Printer with Raw work how to setup

[int]

reboot issue happen....

and the router can't connect any more to internet... netheir with manual connect...

log in atttach




i return to test 1.9.2.7-4a-pre12

[kfaessen]

Starting with 1.9.2.6 ASUS added RAW printer support, so it should work. Use port 9100 regardless of printer type.

That still doesn't work for me. Your custom firmware didn't had any problems with the printer (it's connected through the LPT port).

I tried RAW mode on port 9100 and 9101, both didn't work. Same settings like I use in your custom firmware.

[apglad]

Hi all

I am thank ful to your site for releasing thease firmwares for asus.



I am not that power ful in linux and all thats things you do with thease firmwares and sources codes.

I am trying each of your firmwares you releases. But the only works batter is 1.9.3.5 . It is the only release which runs my router for many days without disconnecting or rebooting. the releases before have the Wan port die problem. but i think that txpower block is not working properly, 19 or 84 mw changes nothing. I have a pc is at approx 2.5 meteres with one wall , and another at approx 4 -5 meters behind 3 walls.


the latests have auto self reboot problem. every 10-15 minutes the router reboots automatically (PC looses wireless and last reboot time reset at same time). I dont know which event does this cause each reboot delets all the logs . I have an 10 mbps full duplex ethernet dsl modem of local isp (not branded) which goes upto 7000-8000kbps on a DSL line (unlocked dsl speed rate). May this information helps you for the next firmware....

If you recognise this problem why it happens?

sorry for my bizarre french english

Thank you
apglad

[Oleg]

May this information helps you for the next firmware....

If you recognise this problem why it happens?

This firmware is an official ASUS beta, it's not a custom firmware, so feel free to conact ASUS tech support.

[Antiloop]

the latests have auto self reboot problem. every 10-15 minutes the router reboots automatically (PC looses wireless and last reboot time reset at same time). I dont know which event does this cause each reboot delets all the logs . I have an 10 mbps full duplex ethernet dsl modem of local isp (not branded) which goes upto 7000-8000kbps on a DSL line (unlocked dsl speed rate). May this information helps you for the next firmware....

please read the info at this URL http://wl500g.info/faq.php?faq=asus_...ropsconnection and especially the turn off for 10 minutes part

[chris4335]

Hello, can anyone confirm this problem, the connection is to german t-online,
Problem: not connecting (I replaced IP with XXX):

Jan 1 01:00:05 pppd[66]: pppd 2.4.2 started by (unknown), uid 0
Jan 1 01:00:05 pppd[66]: Using interface ppp0
Jan 1 01:00:05 pppd[66]: local IP address xxx.xxx.xxx.xxx
Jan 1 01:00:05 pppd[66]: remote IP address xxx.xxx.xxx.xxx
Jan 1 01:01:26 pppd[66]: Starting link
Jan 1 01:01:26 pppd[66]: Serial connection established.
Jan 1 01:01:26 pppd[66]: Connect: ppp0 -> /dev/pts/0
Jan 1 01:01:27 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:30 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:33 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:36 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:40 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:43 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:46 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:49 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:52 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:55 pppd[66]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 01:01:58 pppd[66]: Modem hangup
Jan 1 01:01:58 pppd[66]: Connection terminated.

Best regards,

Christoph

[fastfox]

im very fine with this new release,
no reboots
no problen on usb harddrive
no problem using dyn dns
nothing at all

germany t-online user

btw it works a bit better since i got a new dsl modem (uart2)
i thought it could be the reason why it disconnected before

[tonia]

Not able to change device's user name for login.

[Antiloop]

Not able to change device's user name for login.

what are you trying to say or ask?

if you talk about that you can't change the user login name for websetup this has NEVER been possible in a firmware from asus

[tonia]

Thank You, yes, that was what I was saying. Was not aware of the hard facts, I should have read other threads before

[Dark_Zen]

I Use this firmware since yesterday.
I still have no problems :-)
1.9.2.7-5a gave me 'lost connection with isp' problem.
Hope this is all over now.
Btw. When u use this fw it is possible to flash back to an older version.
I've tested it yesterday.

[Antiloop]

I Use this firmware since yesterday.
I still have no problems :-)
1.9.2.7-5a gave me 'lost connection with isp' problem.
Hope this is all over now.
Btw. When u use this fw it is possible to flash back to an older version.
I've tested it yesterday.

yes it is possible to flashback an older firmware, allthough I strongly suggest you to reset settings to defaults as they can and probably will cause problems