Hmmmm, wenn ich das richtig sehe muss ich mich dafür bei google anmelden, google ist böse, mmmmkayyyy , sonst wäre das mit Sicherheit sinnvoll.
echt? cool
erstellst du dazu nen bug report?
RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
pyload 0.4.9
minidlna 1.1.2
samba 3.6.5
openvpn 2.3.10
̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired
Hmmmm, wenn ich das richtig sehe muss ich mich dafür bei google anmelden, google ist böse, mmmmkayyyy , sonst wäre das mit Sicherheit sinnvoll.
ja, dann mach ichs für dich :P
edit: aber du musst auf Rückfragen antworten!
Last edited by !gm; 10-02-2012 at 18:15.
RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
pyload 0.4.9
minidlna 1.1.2
samba 3.6.5
openvpn 2.3.10
̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired
Das wär super , Rückfragen beantworten is kein Thema, will mich nur bet bei Big Google anmelden müssen .
Problem tritt bei jeder Firmware ab Build 3702 auf (vorher hab ich nicht getestet), aktuell bin ich auf 3776.
Wenn NTFS Support aktiviert ist sind über wlan nurnoch Übertragungsraten um 150kb/s möglich (selbst direkt neben dem Router), außerdem schwankt die Verbindungsgeschwindigkeit die Windows anzeigt sehr stark, bis runter auf 11mb/s.
Nach dem Deaktivieren vom NTFS Support sind neben dem Router wieder 10mb/s möglich, die angezeigte Verbindungsgeschwindigkeit im Windows sinkt nicht mehr unter 200mb/s.
Ich denke mal, das ist so ok, oder?
http://code.google.com/p/wl500g/issues/detail?id=299
RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
pyload 0.4.9
minidlna 1.1.2
samba 3.6.5
openvpn 2.3.10
̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired
Erstmal vielen Dank fürs Posten , hatte am WE leider keine Zeit hier rein zu schauen.
Das ganze scheint ja bei den englischen Jungs auf Deutsch net zu funktionieren ^^. Ich versuch mal mein Glück:
NTFS Support Enabled: Windows shows me most time a Connection Speed of 11mbit/s in Wireless proberties, when i put a file from my NAS to my Notebook it only transfers with ~150kb/s.
NTFS Support Disabled: Windows shows me most time a Connection Speed of 300mbit/s in Wireless proberties, when i put a file from my NAS to my Notebook it transfers with ~8Mb/s.
I have no NTFS Devices connectet to the RT-N16, just one FAT32 8gb USB Stick.
There are no other processes on the Router which uses great bandwith, just a web server, but i have just an upload of 256kbit/s, so that should not make much traffic in the network .
Greetings MrMmmkay
Hi.
So it looks like i´m the only one with this problem, so i´m going to check that again. It could be a coincidence (im not sure if its the right word) that the Problem is gone after unchecking ntfs support, but i cant believe that right now.
I´l give it a try this evening again and get you informed here in this thread.
Greetings MrMmmkay
Hi.
Like promised i´ve take a look at this problem again. Its interesting, the Problem is realy not the NTFS Support, sorry for that.
Lets start at the beginning...
I´ve got the Problem with the slow transfer rate. After much changing of wlan settings on the RT-N16 i cant get rid of the problem, so i decided to make a factory reset of the device and make all settings one after the other to see were the problem was locatet.
After cecking the NTFS Support Box the Problem was gone, so i thougt that this was the problem.
Yesterday i take a look at this again and i saw an other difference to my old settings... the wlan Channel was set to Auto (also subchannel). It looks like this has eliminated the problem, not the ntfs button.
But i dont realy understand why changing the channel to auto solved the problem. There are no other Accespoints near our house that can intefear our wlan.
With the slow connection speed i had set the Channel to "1", now i set it to Auto, but wenn i take a look the channel is the channel is just at "1", so i cant see why the connection speed now is better...
Greetings MrMmmkay
darum konnte lly das nicht nachstellen
therefore lly can't repoduce this
RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
pyload 0.4.9
minidlna 1.1.2
samba 3.6.5
openvpn 2.3.10
̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired
So, it looks like you are right Ily, the Problem is not gone , i just dont see it because i wasnt using my NAS in the last days.
Yesterday evening i gone back to 3497, i take a look this evening if the Problem is gone or not.
Greetings MrMmmkay
Ok, looks like the Problem is gone with the 3497 Firmware , so i´l stay at this version until the new Broadcom thing is integrated
Hi, ich mal wieder.
Ich habe seit kurzem einen Kodak ESP 6150 Multidrucker hier stehen. Er ist per Wlan an den RT-N16 angeschlossen, alles funktioniert soweit einwandfrei. Leider unterstützt der Drucker noch kein Cloud Printing (zumindestens nicht ohne das ein Rechner eingeschaltet sein muss).
Gibt es trotzdem eine Möglichkeit von außen über das Internet direkt auf den Drucker zu drucken?
Gruß
MrMmmkay
Alle HowTo's, all howto's
RT-N16 1.9.2.7-rtn-r3121, Samba, VSFTP, Lightthpd, PHP, Perl, MySQL, Serendipity, Aria2web, HDD 640GB
RT-N66U, 16GB MicroSD/ 2 Partitions, 2,5" HDD 1TB, running with Merlin's FW and Entware, 16 Mbit A1,
Netgear DGND 3700V2, QNAP TS119PII 4 TB, QNAP TS209 2 TB Raid1, Backup Synology DS107+ 1 TB, HP CP1515n
oder usbip - um wirklich alle Funktionen des Kombigeräts nutzen zu können
Last edited by !gm; 26-02-2012 at 21:09.
RT-N66U TomatoUSB 1.28.0000 MIPSR2-135 K26AC USB AIO-64K running Entware-NG
pyload 0.4.9
minidlna 1.1.2
samba 3.6.5
openvpn 2.3.10
̶W̶L̶5̶0̶0̶g̶P̶ ̶1̶.̶9̶.̶2̶.̶7̶-̶r̶t̶n̶-̶r̶4̶7̶5̶0 retired
OpenVPN oder SSH-Tunnel