Is anybody using that device with WL-500b/g? The camera is working for me but I am not able to get any pictures sent by e-mail. The motion detection does not seem to be working - the router does not try to connect the SMTP server at all. I would appreciate if somebody could put the working Security Mode Setting here... I have the SMTP server running at LAN address 192.168.1.2, router's address is default - 192.168.1.1. I am able to send an e-mail from WL-500b by sendmail application manually.
What is also strange to me - the RCAMD application is present 3 times in memory - I wonder if this is normal or not...
And another problem is that Webcam is not properly initialized after the router reboot in most cases. Usually I have to unplug it and plug to router again to get the Webcam working...
Any comment / advice is welcome...
PID Uid VmSize Stat Command
1 0 1864 S init
2 0 S [keventd]
3 0 S [ksoftirqd_CPU0]
4 0 S [kswapd]
5 0 S [bdflush]
6 0 S [kupdated]
7 0 S [mtdblockd]
211 0 1840 S syslogd -m 0 -O /etc/linuxigd/syslog.log -t MET-1ME
215 0 1840 S klogd
288 0 1480 S udhcpc -i eth1 -p /var/run/udhcpc.pid -s /usr/share
324 0 1544 S httpd
342 0 1456 S /sbin/dproxy -c /etc/dproxy.conf
372 0 S [khubd]
440 0 1592 S /sbin/lpd
441 0 1448 S /sbin/infosvr br0
444 0 1860 S /bin/sh /init/rc.watchdog ROUTER
445 0 1868 S /bin/sh /init/upnpserver eth1
456 0 2456 S upnp -D -L br0 -W eth1
467 0 1448 S /usr/sbin/watchdog 30 192.168.1.2 MET-1METDST 11111
491 0 6448 S /usr/sbin/rcamd -m 100 -c 100 -f 320x240 -p 7777 -s
492 0 6448 S /usr/sbin/rcamd -m 100 -c 100 -f 320x240 -p 7777 -s
493 0 6448 S /usr/sbin/rcamd -m 100 -c 100 -f 320x240 -p 7777 -s
537 0 1840 S sleep 30s
541 0 1844 S sh -c ps > /etc/linuxigd/syscmd.log
542 0 1844 R ps