Page 9 of 13 FirstFirst ... 7891011 ... LastLast
Results 121 to 135 of 195

Thread: [HowTo] Sane Scanner-Server with XSane Frontend

  1. #121
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    means that the file is damaged...
    I upoaded it again, the link is updated.

    http://rapidshare.com/files/39484398...2-1_mipsel.ipk

    Regards
    Oliver
    Last edited by carterb; 03-06-2010 at 17:01.
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  2. #122
    Unfortunately, I still get the same error.

    here's the file I downloaded this morning
    -rw-r--r-- 1 root root 47646 Jun 3 09:36 hplip_3.9.2-1_mipsel.ipk
    here's the file I downloaded just now
    -rw-r--r-- 1 root root 47648 Jun 3 13:28 hplip_3.9.2-1_mipsel.ipk

  3. #123
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    I will check that tomorrow.

    Regards
    Oliver
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  4. #124
    Join Date
    May 2010
    Location
    Ukraine, Kyiv
    Posts
    25
    Wow, thanks for amazing faq! I followed it to setup printer server for my RT-N16 and it works!

    However the conf file for sane server was not properly generated, I had to modify it, but afterwards it works like a charm!

  5. #125
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    what did you have to change at the config file?

    Regards
    Oliver
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  6. #126
    Join Date
    Oct 2006
    Location
    Moscow
    Posts
    24
    Quote Originally Posted by rm_fontes View Post
    I searched on the forum for this and found http://wl500g.info/showthread.php?t=20098.
    Is it possible to make the hp dsc 1510 work without dbus?
    Try use old version of dbus:
    dbus_1.1.1-3_mipsel.ipk

    Also, need install CUPS - all work fine with hplip_3.9.2-1_mipsel.ipk!
    http://www.nslu2-linux.org/wiki/HowT...gScanWithHPLIP

    Asus WL-500W + HP LaserJet 3055 All-in-One Printer
    Last edited by kulibin; 30-06-2010 at 14:52.

  7. #127
    kulibin -- can you please let me know from where you downloaded hplip_3.9.2-1_mipsel.ipk. Is that the version carterb put on rapidshare? Thanks.

  8. #128
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    yes, I compiled 3.9.2-1!
    Should work...

    Regards
    Oliver
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  9. #129
    Join Date
    Oct 2006
    Location
    Moscow
    Posts
    24
    Quote Originally Posted by chuckwhite View Post
    kulibin -- can you please let me know from where you downloaded hplip_3.9.2-1_mipsel.ipk. Is that the version carterb put on rapidshare? Thanks.
    Yes, this version of carterb from rapidshare.

  10. #130

    Not working anymore with Canon PIXMA MP140

    I have some problems getting this to work with my Canon PIXMA MP140 device. Previously (about a half year ago) I had no trouble using the scanner of the device: the sane scanner server worked like a charm with my WL500gPV2 and I could easily use the scanner via XSane with my PC.

    However, now when I had to completely reinstall all software to the router (USB stick got corrupted), I no longer can use the scanner. I did everything exactly the same as previously. The scanner is recognized and even the scanning procedure starts. However, the problem is that the scanner is never stopped. The scanner seems to really scan the paper but then it does not stop as it should: the scanning lights just keep on rolling forever.

    Below are some outputs with scanimage from my router:

    Code:
    [root@router root]$ scanimage -L
    device `pixma:04A9172B_05C0C4' is a CANON Canon PIXMA MP140 multi-function peripheral
    Code:
    [root@router root]$ sane-find-scanner 
    found USB scanner (vendor=0x04a9 [Canon], product=0x172b [MP140 series]) at libusb:002:003
    Code:
    [root@router root]$ scanimage -vvvv -T
    scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
    scanimage: acquiring RGB frame, 8 bits/sample
    scanimage: reading one scanline, 1914 bytes...  scanimage: received signal 2
    scanimage: trying to stop scanner
    scanimage: received signal 2
    scanimage: aborting
    Above, the process hangs to the "reading one scanline, 1914 bytes". It does not stop until I press Ctrl+C when it tries to stop the scanner without luck. Finally, I have to manually power off the scanner.

    The firmware is Oleg's WL500gpv2-1.9.2.7-d-r1612 (I also tried it with r1000 which I previously had but with no luck) with the full install specified in http://wl500g.info/showthread.php?t=21774.

    I checked that the scanner of the device does really work by plugging it directly to my PC. I even tried a different USB cable. It seems that there is something wrong with the scanimage program: everything else works but it just can't stop the scanner. Any suggestions how to fix this? Are the previous versions of sane-backends downloadable for WL500g somewhere?

  11. #131
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    can you scan from a remote client, XSane...?

    Regards,
    Oliver
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  12. #132
    Quote Originally Posted by carterb View Post
    Hi,
    can you scan from a remote client, XSane...?
    Yes I can, but it does exactly the same as using the scanimage directly from the router. Xsane finds the scanner and starts the scanning but the scanner is never stopped. The scanning lights on the scanner just keep rolling forever. The sounds that the scanner makes indicates that it does the actual scanning but for some reason fails at the last step.

    The XSane program stops to the state "Receiving RGB data" so propably there are some problems in sending/receiving the scan data. Are there any ways to get more detailed error messages e.g. with scanimage or Xsane?

    EDIT: Never mind about the extra debug info. I found out way to get extra info with setting some environmental variables specified in http://www.sane-project.org/man/sane-pixma.5.html
    Last edited by mvnet; 24-07-2010 at 22:17.

  13. #133
    Here is some more detailed debug info about my problem:
    Code:
    export SANE_DEBUG_PIXMA=21
    export PIXMA_EXPERIMENT=0
    export SANE_CONFIG_DIR=/opt/etc/sane.d:
    scanimage -T
    
    [sanei_debug] Setting debug level of pixma to 21.
    [pixma] pixma is compiled without pthread support.
    [pixma] Could not read pixma configuration file: pixma.conf
    [pixma] pixma version 0.16.2                               
    [pixma] pixma_collect_devices() found Canon PIXMA MP140 at libusb:002:012
    [pixma] sanei_bjnp_find_devices:                                         
    [pixma] Added all configured scanners, now do auto detection...          
    [pixma] scanner discovery finished...                                    
    [pixma] pixma_find_scanners() found 1 devices                            
    [pixma] pixma_collect_devices() found Canon PIXMA MP140 at libusb:002:012
    [pixma] sanei_bjnp_find_devices:                                         
    [pixma] Added all configured scanners, now do auto detection...          
    [pixma] scanner discovery finished...                                    
    [pixma] pixma_open(): Canon PIXMA MP140                                  
    [pixma] OUT  T=2.823 len=16                                              
    [pixma]  00000000:f3 20 00 00 00 00 00 00  00 00 00 00 00 00 00 10       
    [pixma]                                                                  
    [pixma] IN   T=2.844 len=24                                              
    [pixma]  00000000:06 06 00 00 00 00 00 00  01 00 00 00 00 03 00 02       
    [pixma]  00000010:00 00 00 00 00 00 00 fa                                
    [pixma]                                                                  
    [pixma] Current status: paper=0 cal=0 lamp=2 busy=0                      
    [[pixma] Reader task started                                             
    [pixma]                                                                  
    [pixma] pixma_scan(): start                                              
    [pixma]   line_size=1914 image_size=1678578 channels=3 depth=8           
    [pixma]   dpi=75x75 offset=(0,0) dimension=638x877                       
    [pixma]   gamma_table=0x444234 source=0                                  
    pixma] Reader task id=281 (forked)                                       
    scanimage: scanning image of size 638x877 pixels at 24 bits/pixel        
    scanimage: acquiring RGB frame, 8 bits/sample                            
    scanimage: reading one scanline, 1914 bytes...  [pixma] INTR T=5.019 len=16
    [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00         
    [pixma]                                                                    
    [pixma] Sending time: '10/07/24 23:27'                                     
    [pixma] OUT  T=5.022 len=36                                                
    [pixma]  00000000:eb 80 00 00 00 00 00 00  00 00 00 00 00 00 00 14         
    [pixma]  00000010:31 30 2f 30 37 2f 32 34  20 32 33 3a 32 37 00 00         
    [pixma]  00000020:00 00 00 4c                                              
    [pixma]                                                                    
    [pixma] IN   T=5.024 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] OUT  T=5.130 len=16                                                
    [pixma]  00000000:db 20 00 00 00 00 00 00  00 00 00 00 00 00 00 00         
    [pixma]                                                                    
    [pixma] IN   T=5.136 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] OUT  T=5.138 len=28                                                
    [pixma]  00000000:dd 20 00 00 00 00 00 00  00 00 00 00 00 00 00 0c         
    [pixma]  00000010:01 01 00 00 00 01 00 00  00 00 00 fd                     
    [pixma]                                                                    
    [pixma] IN   T=5.140 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] OUT  T=5.142 len=2072                                              
    (snipped some useless stuff)
    [pixma]                                                                    
    [pixma] IN   T=5.172 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] OUT  T=5.174 len=64                                                
    [pixma]  00000000:de 20 00 00 00 00 00 00  00 00 00 00 00 00 00 30         
    [pixma]  00000010:00 00 00 00 80 4b 80 4b  00 00 00 00 00 00 00 00         
    [pixma]  00000020:00 00 02 80 00 00 03 6d  08 18 00 00 00 00 00 00         
    [pixma]  00000030:ff 00 00 81 00 00 02 01  00 00 00 00 00 00 00 d5         
    [pixma]                                                                    
    [pixma] IN   T=5.176 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] OUT  T=5.178 len=16                                                
    [pixma]  00000000:f3 20 00 00 00 00 00 00  00 00 00 00 00 00 00 10         
    [pixma]                                                                    
    [pixma] IN   T=5.180 len=24                                                
    [pixma]  00000000:06 06 00 00 00 00 00 00  01 00 00 00 00 03 00 02         
    [pixma]  00000010:00 00 21 00 00 00 00 d9                                  
    [pixma]                                                                    
    [pixma] Current status: paper=0 cal=0 lamp=2 busy=0                        
    [pixma] INTR T=5.399 len=16                                                
    [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00         
    [pixma]                                                                    
    [pixma] Sending time: '10/07/24 23:27'                                     
    [pixma] OUT  T=5.401 len=36                                                
    [pixma]  00000000:eb 80 00 00 00 00 00 00  00 00 00 00 00 00 00 14         
    [pixma]  00000010:31 30 2f 30 37 2f 32 34  20 32 33 3a 32 37 00 00         
    [pixma]  00000020:00 00 00 4c                                              
    [pixma]                                                                    
    [pixma] IN   T=5.403 len=8                                                 
    [pixma]  00000000:06 06 00 00 00 00 00 00                                  
    [pixma]                                                                    
    [pixma] INTR T=18.069 len=16                                               
    [pixma]  00000000:00 00 00 00 00 00 00 00  00 02 00 00 00 00 00 00         
    [pixma]                                                                    
    [pixma] OUT  T=18.071 len=16                                               
    [pixma]  00000000:f3 20 00 00 00 00 00 00  00 00 00 00 00 00 00 10         
    [pixma]                                                                    
    [pixma] IN   T=18.073 len=24                                               
    [pixma]  00000000:06 06 00 00 00 00 00 00  01 00 00 00 00 03 00 02         
    [pixma]  00000010:00 01 21 00 00 00 00 d8                                  
    [pixma]                                                                    
    [pixma] Current status: paper=0 cal=0 lamp=2 busy=1                        
    [pixma] OUT  T=19.079 len=16                                               
    [pixma]  00000000:d4 20 00 00 00 00 00 00  00 00 00 00 00 08 00 08         
    [pixma]                                                                    
    [pixma] IN   T=19.081 len=512                                              
    [pixma]  00000000:06 06 00 00 00 00 00 00  00 00 00 00 00 03 80 00         
    [pixma]  00000010:bd 91 8a b1 94 9a bc 91  93 aa 97 a6 bf 93 ab b7         
    (snipped some useless stuff)
    [pixma]  000001f0:8c 7b 73 92 80 73 8a 7f  73 8b 83 75 87 7f 73 89
    [pixma]
    [pixma] IN   T=19.090 len=-9
    [pixma]   ERROR: ETIMEDOUT
    [pixma]
    [pixma] IN   T=19.093 len=-9
    [pixma]   ERROR: ETIMEDOUT
    [pixma]
    Last edited by mvnet; 24-07-2010 at 23:22.

  14. #134
    Join Date
    Jul 2007
    Location
    Germany, Bonn
    Posts
    374
    Hi,

    that seems to be a problem with the pixma-backend...
    Ask at the sane-project mailinglist for a support on that. Maybe they can help you any further...

    http://lists.alioth.debian.org/mailm...nfo/sane-devel
    Regards / Grüße,
    Oliver

    [How-To] Sane Scanner-Server mit XSane Frontend "german"
    [How-To] Sane Scanner-Server with XSane Frontend "english"

    Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
    Speicher: Trekstor DataStation maxi 1 Tb
    Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver

  15. #135
    Join Date
    Jun 2010
    Location
    Moscow, Russia
    Posts
    322
    please help!!! I have some troubles with Canon Pixma MP810

    xsane permanently write FAIL Error: Error during device I/O

    [root@rtn16 root]$ scanimage -L
    device `pixma:04A9171A_313DEE' is a CANON Canon PIXMA MP810 multi-function peripheral

    [root@rtn16 root]$ scanimage -T >> /tmp/sane-log.log
    scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
    scanimage: acquiring RGB frame, 8 bits/sample
    scanimage: reading one scanline, 1914 bytes... FAIL Error: Error during device I/O

    /tmp/sane-log.log is empty

    /opt/etc/sane.d/saned.conf

    Code:
    # saned.conf
    # Configuration for the saned daemon
    
    ## Daemon options
    # Port range for the data connection. Choose a range inside [1024 - 65535].
    # Avoid specifying too large a range, for performance reasons.
    #
    # ONLY use this if your saned server is sitting behind a firewall. If your
    # firewall is a Linux machine, we strongly recommend using the
    # Netfilter nf_conntrack_sane connection tracking module instead.
    #
    # data_portrange = 10000 - 10100
    
    
    ## Access list
    # A list of host names, IP addresses or IP subnets (CIDR notation) that
    # are permitted to use local SANE devices. IPv6 addresses must be enclosed
    # in brackets, and should always be specified in their compressed form.
    #
    # The hostname matching is not case-sensitive.
    
    #scan-client.somedomain.firm
    #192.168.0.1
    192.168.1.0/24
    #[2001:7a8:185e::42:12]
    #[2001:7a8:185e::42:12]/64
    
    # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
    # /etc/services must also be properly configured to start
    # the saned daemon as documented in saned(8), services(4)
    # and inetd.conf(4) (or xinetd.conf(5)).
    putty.log in attachment
    sorry for my english..
    Attached Files Attached Files
    Last edited by Parkinstein; 05-08-2010 at 10:45.

Page 9 of 13 FirstFirst ... 7891011 ... LastLast

Similar Threads

  1. Replies: 24
    Last Post: 05-05-2015, 08:42
  2. SANE (Scanner server) - Any chance for WL-500g?
    By Dante_ in forum WL-500g Custom Development
    Replies: 107
    Last Post: 31-08-2012, 11:41
  3. [HowTo] Sane Scanner-Server mit XSane Frontend
    By carterb in forum German Discussion - Deutsch (DE)
    Replies: 9
    Last Post: 30-08-2012, 20:01
  4. HowTo install OpenVPN server
    By Tamadite in forum WL-500g/WL-500gx Tutorials
    Replies: 41
    Last Post: 31-05-2012, 21:41
  5. HowTo secure FTP server (SSL/TLS)
    By Tamadite in forum WL-500gP Tutorials
    Replies: 12
    Last Post: 14-10-2008, 20:38

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •