Hi,
I will check that.
Regards
Oliver
hi
I found that install scanner.o to modules but I have other kernel :
but in free i have:Code:Using //opt/lib/modules/2.4.37.7/kernel/drivers/usb/scanner.o //opt/lib/modules/2.4.37.7/kernel/drivers/usb/scanner.o: error reading ELF section data //opt/lib/modules/2.4.37.7/kernel/drivers/usb/scanner.o: No space left on device
Code:$ free total used free shared buffers Mem: 29960 27556 2404 0 720 Swap: 506008 760 505248 Total: 535968 28316 507652
Last edited by adek24; 19-02-2010 at 07:21.
Hi,
I will check that.
Regards
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
hi, i finally got time to do install everything from the beginning. I got from sane-find-scannerand from scanimage -LCode:found USB scanner (vendor=0x03f0 [HP], product=0x4c11 [PSC 1500 series]) at libusb:001:003.Code:device `hpaio:/usb/PSC_1500_series?serial=MY5ADD13KM0498' is a Hewlett-Packard PSC_1500_series all-in-one
from scanimage -T i gotI searched on the forum for this and found http://wl500g.info/showthread.php?t=20098.Code:process 380: arguments to dbus_connection_send() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3141. This is normally a bug in some application using the D-Bus library. D-Bus not compiled with backtrace support so unable to print a backtrace Aborted
Is it possible to make the hp dsc 1510 work without dbus?
I also trying to get samsung scx-4200 working, first all look fine scanimage is working just fine so driver is working. But can't connect from my desktop computer to scanner, telnet to port 6566 can't connect.
added /etc/service "saned 6566/tcp" because that not been there but no help, and /opt/etc/init.d/S01sane-backends look just correct.
So now im just out of idea what im doing wrong, so little help is welcome. Only diffrence to tutorial is my firmware is koppel made if that marks anything.
EDIT: Checked all again and noticed that port again lost from /etc/service/saned file after i reboot my router, so what to do to correct this problem?
Xinetd -d Also give erros and not to start.
EDIT: Full reinstall helps and scanner is working now, not know what was wrong previusly, noticed my router network connection have random dropouts (ipkg give random unknow host errors) problem is on 500gp side, network connection is working fine other computers.Code:10/4/28@16:08:35: DEBUG: 129 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=15] 10/4/28@16:08:35: ERROR: 129 {service_fill} Port not specified and can't find se rvice: saned with getservbyname Service defaults Instances = 60 CPS = max conn:25 wait:30 Bind = All addresses. Only from: localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0 .0(NET) 192.168.1.0/255.255.255.0(NET) No access: No blocked sites Logging to syslog. Facility = authpriv, level = info Log_on_success flags = HOST PID Log_on_failure flags = HOST 10/4/28@16:08:35: DEBUG: 129 {cnf_start_services} mask_max = 0, services_started = 0 10/4/28@16:08:35: CRITICAL: 129 {init_services} no services. Exiting...
Last edited by Radon; 01-05-2010 at 20:55.
Hi,
nice to hearEDIT: Full reinstall helps and scanner is working now, not know what was wrong previusly, noticed my router network connection have random dropouts (ipkg give random unknow host errors) problem is on 500gp side, network connection is working fine other computers.
samsung scx-4200 is well supported!
Regards
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hi,
@rm_fontes: I have to ask the sane-mailing-list again. Don't know whats the problem...
Last edited by carterb; 18-05-2010 at 22:33.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hi, everyone
I have installed everything like in 1st post, but when I start front-end xsane.exe i recieve answer that there is no devices.
IP of my router 192.168.1.1. I start scan from 192.168.1.31
this is my log
17:43:53 22-05-2010 (info|authpriv|xinetd) xinetd[448]: START: saned pid=1267 from=192.168.1.31
17:43:53 22-05-2010 (debug|daemon|saned) saned[1267]: saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up
17:43:53 22-05-2010 (debug|daemon|saned) saned[1267]: check_host: access by remote host: 192.168.1.31
17:43:55 22-05-2010 (debug|daemon|saned) saned[1267]: check_host: getaddrinfo for local hostname failed: Name or service not known
17:43:55 22-05-2010 (debug|daemon|saned) saned[1267]: init: access by host 192.168.1.31 denied
17:43:55 22-05-2010 (debug|daemon|saned) saned[1267]: saned exiting
as far as i understand there is not enough permissions. but where??
/opt/etc/sane.d/saned.conf
/opt/etc/xinetd.d/sanedPHP Code:
#scan-client.somedomain.firm
#192.168.1.1
192.168.1.0/31
#[2001:7a8:185e::42:12]
#[2001:7a8:185e::42:12]/64
attachment my net.conf from hard drivePHP Code:
service saned
socket_type = stream
server = /opt/sbin/saned
protocol = tcp
user = root
group = root
wait = no
disable = no
RT-N16 - Firmware 1.9.2.7-rtn-r***
Try
192.168.1.0/24 instead of 31 (/31 means all but the last bit are fixed therefore only 192.168.1.1 is allowed to connect to the server)
thanks
my /opt/etc/sane.d/saned.conf looks like:
now I can scan from all the PC and notebooks in my net.PHP Code:
#scan-client.somedomain.firm
#192.168.1.1
192.168.1.2/24
#[2001:7a8:185e::42:12]
#[2001:7a8:185e::42:12]/64
RT-N16 - Firmware 1.9.2.7-rtn-r***
Router: RT-N16, Firmware: tomato-K26USB-1.27.9045MIPSR2-beta11-vpn3.6, Printer: HP LJ M1319f MFP
All clients connected to router can print.
Installed the following (in that sequence): libusb, libtiff, libjpeg, libpng, libieee1284, xinetd, sane-backends, hplip
Output of all diagnostic tests (..xinetd.d/saned, ../sane.d/dll.conf, ../init.d/S01sane-backends, etc.) in attached file.
== output of sane-find-scanner ==>
found USB scanner (vendor=0x03f0, product=0x5817) at libusb:001:002
== output of scanimage -L ==>
No scanners were identified.
I would appreciate any help in getting this to work. I am happy to test ideas...
Hi,
sorry I was out of town.
I will look for a solution.
Regards
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Looking at the sane-devel mailing list it appears a couple of folks had their HP scanner issues go away by using a later version of HPLIP. example
The current version is 3.10.x [link]. The version which has been compiled for the routers is 2.8.x (link)
Would it be possible to compile the latest version?
Hi,
I will take a look on that.
Maybe I can maintain hplip (or ask the person who maintains it) and make a newer version.
Regards
Oliver
Last edited by carterb; 28-05-2010 at 19:12.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hi,
I compiled a new version of hplip for the wl500.
Version is: 3.9.2
Would be nice if you could give it a try and post your experiences. To install it do the following:
Remove the old version of hplip:
Download the new version of hplip:Code:ipkg remove hplip
http://rapidshare.com/files/39484398...2-1_mipsel.ipk
Install the new version:
If you are asked to edit the dll.conf of sane, type:Code:ipkg install /storagelocation/of_downloaded/file/hplip_3.9.2-1_mipsel.ipk
Check if the following entry is in /opt/etc/sane.d/dll.confCode:Y
If the output is empty, add the entry:Code:grep hpaio /opt/etc/sane.d/dll.conf
Restart:Code:echo "hpaio">>/opt/etc/sane.d/dll.conf
Please post your experiences!!!Code:flashfs save && flashfs commit && flashfs enable && reboot
Regards
Oliver
Last edited by carterb; 10-07-2010 at 09:00.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Thanks for compiling this version. I used wget to download it to my router and then when I try to install, I get:
ipkg: invalid magic
Any ideas what the issue might be? Thanks.