[HowTo] Sane Scanner-Server with XSane Frontend

[electropanda]

Greetings.
I need help.
I have wl500gp with 1.9.2.7-d-r1825 firmware. Also I have HP PhotoSmart c5283. And I should use it as scanner too (it works perfectly as printer).
I have installed sane-backends with all libs needed and hplip 3.9.2. Shorter I have exactly followed the HOW-TO. But it doesn`t work.

Input:

sane-find-scanner

Output:

Segmentation fault

Input:

scanimage -L

Output:

Segmentation fault

I have installed XSane on WinXP as described too.

When I run Xsane there is a message in /opt/var/log/xinetd.log:

10/10/3@14:43:53: START: saned pid=3559 from=192.168.1.5

Else,
Input:

xinetd -d

Output:

10/10/3@14:49:30: DEBUG: 3587 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=16]
10/10/3@14:49:30: DEBUG: 3587 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/swat [file=/opt/etc/xinetd.d/swat] [line=12]
Service defaults
        Instances = 60
        CPS = max conn:25 wait:30
        Bind = All addresses.
        Only from:  localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0.0(NET) 192.168.1.0/255.255.0.0(NET)
        No access: No blocked sites
        Logging to file: /opt/var/log/xinetd.log (no limits)
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

Service configuration: saned
        id = saned
        flags = IPv4
        socket_type = stream
        Protocol (name,number) = (tcp,6)
        port = 6566
        wait = no
        user = 0
        group = 0
        Groups = no
        PER_SOURCE = -1
        Bind = All addresses.
        Server = /opt/sbin/saned
        Server argv = saned
        Only from:  localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0.0(NET) 192.168.1.0/255.255.0.0(NET)
        No access: No blocked sites
        Logging to common log file
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

Service configuration: swat
        id = swat
        flags = IPv4
        socket_type = stream
        Protocol (name,number) = (tcp,6)
        port = 901
        wait = no
        user = 0
        Groups = no
        PER_SOURCE = -1
        Bind = All addresses.
        Server = /opt/sbin/swat
        Server argv = swat
        Only from:  localhost(HOST) 192.168.1.0/255.255.255.0(NET)
        No access: No blocked sites
        Logging to common log file
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST USERID

10/10/3@14:49:30: ERROR: 3587 {activate_normal} bind failed (Address already in use (errno = 125)). service = saned
10/10/3@14:49:30: ERROR: 3587 {cnf_start_services} Service saned failed to start and is deactivated.
10/10/3@14:49:30: ERROR: 3587 {activate_normal} bind failed (Address already in use (errno = 125)). service = swat
10/10/3@14:49:30: ERROR: 3587 {cnf_start_services} Service swat failed to start and is deactivated.
10/10/3@14:49:30: DEBUG: 3587 {cnf_start_services} mask_max = 0, services_started = 0
10/10/3@14:49:30: CRITICAL: 3587 {init_services} no services. Exiting...

Contents of
/opt/etc/xinetd.conf,
/opt/etc/xinetd.d/saned,
/opt/etc/sane.d/saned.conf,
C:\sane\etc\sane.d\net.conf
are below (in attachments).