Firmware WL500g-1.9.2.7-3c-CDMA-1.55

[skier]

Engy,

Are you saying that this is not a good idea to use user dialup files this way?
And what every you attaching is the same thing from KOPPEL firmware.
Engy I will keep looking for Linux driver for my Modem, but I have no luck so far.
Would you still recommend to use it if I won't be able to find the driver?
How can I integrate it in WL500gx-1.9.2.7-7f-USB-1.64.trx?
Thanks in Advance for your advice.

Skier

[skier]

Engy,

Here what I found on one russian forum. Will it work as a driver?
They used it for Linux system, for my particular modem. Works fine.

1. modprobe cdc_acm
2. mknod /dev/usb/ttyACM0 c 166 0
3. Make a script /etc/ppp/peers/cdma-evdo:
921600
connect '/usr/sbin/chat -s -v "" "AT&F0E0V1S0=0" OK ATD#777 CONNECT'
debug
updetach
crtscts
noipdefault
nodetach
novj
lcp-echo-failure 0
nobsdcomp
novjccomp
nopcomp
noaccomp
noauth
user mobile
modem
usepeerdns
defaultroute
connect-delay 5000

4. Â /etc/ppp/pap-secrets äîáàâèòü
mobile * internet

5. pppd /dev/usb/ttyACM0 call cdma-evdo

6. Do not forget to copy after the first session resolv.conf èç /etc/ppp â /etc
08.12.2006 01:19 (Msk) Neptune-1

[engy]

Engy,

Are you saying that this is not a good idea to use user dialup files this way?
And what every you attaching is the same thing from KOPPEL firmware.
Engy I will keep looking for Linux driver for my Modem, but I have no luck so far.
Would you still recommend to use it if I won't be able to find the driver?
How can I integrate it in WL500gx-1.9.2.7-7f-USB-1.64.trx?
Thanks in Advance for your advice.

Skier

In USB Connection select "User defined", upload my file and after reboot fill in connection paramaters. Some devices need special USB initializing and finalizing but usbserial driver is not able to do it, so legacy driver is a better solution.

[skier]

Hi Engy,

Sorry for asking the stupid question. But I am very new in it. What kind of program will you use to create the .gz.tar archives? I opened the archive with
WinRar and cannot create the right type of installation archive. I changed the VID and PID.

Skier.

[skier]

Engy,

Here is the attached archive with changed VID and PID.

Skier.

[skier]

Engy,

Finaly I made the file it in a right way. With the help of my LINUX friend. But it doesn't work. I am attaching the log. Can you say what is wrong. I am attaching the modified dialsample.tar.gz for my modem.



Skier

[engy]

Engy,

Finaly I made the file it in a right way. With the help of my LINUX friend. But it doesn't work. I am attaching the log. Can you say what is wrong. I am attaching the modified dialsample.tar.gz for my modem.



Skier

You have to look at /tmp/chat.log

[skier]

Hi Engy,

The new firmware from Adam
http://koppel.cz/cdmawifi/download/165/
works with my modem. Thanks a lot for your help.

Skier.