Results 1 to 7 of 7

Thread: Need help: "Input/output error" во время "flashfs commit"

  1. #1

    Question Need help: "Input/output error" во время "flashfs commit"

    Господа, хелп плз.
    Выполняю обычный flashfs commit после flashfs save, получаю такую ошибку:
    +/dev/mtd/4: Input/output error

    Что делать???

    Что за раздер /mtd/4 где посмотреть, прочитать.
    В линухе ноль.
    Выполнил fdisk для этого раздела, результа ниже. Это нормально?
    Code:
    [admin@darkstar root]$ fdisk /dev/mtd/4
    Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
    Building a new DOS disklabel. Changes will remain in memory only,
    until you decide to write them. After that, of course, the previous
    content won't be recoverable.
    
    You must set cylinders.
    You can do this from the extra functions menu.
    Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

  2. #2
    Join Date
    Feb 2007
    Location
    Moscow, Russia
    Posts
    3,805
    это раздел на встроенной флашке в котором хранится flashfs
    прошивка и девайс какие?

  3. #3
    Join Date
    Feb 2008
    Location
    Moscow, Tver
    Posts
    3,962
    И логи flashfs save приложите.

  4. #4
    Quote Originally Posted by vectorm View Post
    И логи flashfs save приложите.
    System Log? вот-с
    Code:
    Apr  7 11:21:06 kernel: Flash Program Device Timeout Error. Device timed out.
    Apr  7 11:21:06 kernel: Flash Program Device Timeout Error.
    Apr  7 11:21:06 kernel: nvram_commit: write error
    Apr  7 11:21:09 kernel: Flash Program Device Timeout Error. Device timed out.
    Apr  7 11:21:09 kernel: Flash Program Device Timeout Error.
    Last edited by EvilShrike; 07-04-2009 at 08:25.

  5. #5
    Quote Originally Posted by al37919 View Post
    это раздел на встроенной флашке в котором хранится flashfs
    прошивка и девайс какие?
    Девайс: WL-500W
    Прошивка: WL500W-1.9.2.7-10

  6. #6
    Join Date
    Feb 2007
    Location
    Moscow, Russia
    Posts
    3,805
    имелся в виду вывод в консоли при выполнении flashfs save а заодно можно и flashfs load
    а вообще, похоже на битую флашку...
    а оно когда-нибудь работало?

  7. #7
    Quote Originally Posted by al37919 View Post
    имелся в виду вывод в консоли при выполнении flashfs save а заодно можно и flashfs load
    вывод:
    Code:
    [admin@darkstar sbin]$ flashfs save
    tar: Removing leading '/' from member names
    tmp/local/
    tmp/local/sbin/
    tmp/local/sbin/pre-shutdown
    tmp/local/sbin/pre-mount
    tmp/local/sbin/post-mount
    tmp/local/sbin/post-firewall
    tmp/local/sbin/post-boot
    tmp/local/etc/
    tmp/local/etc/dropbear/
    tmp/local/etc/dropbear/dropbear_rsa_host_key
    tmp/local/etc/dropbear/dropbear_dss_host_key
    tmp/local/root/
    -rw-r--r--    1 admin    root         1362 Apr  7 11:20 /tmp/flash.tar.gz
    Check saved image and type "/sbin/flashfs commit" to commit changes
    [admin@darkstar sbin]$ flashfs commit
    +/dev/mtd/4: Input/output error
    а вообще, похоже на битую флашку...
    блин, в гарантию нести? это же надо оригинальную прошивку восстанавливать (?). как им доказать, что есть проблема?

    а оно когда-нибудь работало?
    да, больше года все было прекрасно.

Similar Threads

  1. Переход на летнее время - проблема с timezone
    By ABATAPA in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 101
    Last Post: 22-12-2014, 11:45
  2. Простая настройка роутера до торрентов
    By gostest in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 1402
    Last Post: 21-05-2010, 18:58

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •