Add "mkdir -p /opt/tmp/ipkg" to the instructions.Originally Posted by mullog
No reason I can think of why mt-daapd won't work ...
-- Rod
Add "mkdir -p /opt/tmp/ipkg" to the instructions.Originally Posted by mullog
No reason I can think of why mt-daapd won't work ...
-- Rod
Oleg
fw 1.9.2.7 CR4 [Oleg]
!!!reboot issue!!!
Last edited by int; 20-03-2005 at 03:04.
Home Page
Marco Sousa from PORTUGAL
[ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]
Hi,
just installed this firmware to try and get a webcam to work and try as I might whenever I change the webcam driver from pwc 8.8 to OV511 2.10 and do a save and restart its back to pwc 8.8
the webcam is a trust 150 spacecam portable which I believe needs the OV driver?
I have been unable to do this with any firmware I have tried up to now
If the cam revert to a PWC driver, it mean it is not properly reconised. You will need to try another webcam, or to get working drivers for it. I think somebody posted drivers for other webcam, but you will have to search for them. Not sure they will work.
Originally Posted by hugo
thanks for that, its my first time trying custom firmware so support is most welcome, tried 3 webcams now and i can see in the status log that they are not recognised, don't know if i can afford to buy to many more
Hi
You only need to check the Asus Handbook for supported cams. If none fits your needs go into shops near you and see which ones they sell, tehn look up google for the used chipset (ovv5xx or philips). Cheap is the Terracam Pro if you get one, and good are the bigger Logitech ones... or ask ebay .Originally Posted by hobbes
Greets
My Stuff: WL-500g, Mapower H31x 10GB HD, Philips Webcam Vesta PRO, TerraTec Webcam PRO, USB Hub
Look also for the dedicated tread compatibility in the forum.Originally Posted by WlanMan
Originally Posted by WlanMan
I read the handbook I think that was why I picked the trust :/ maybe i wasn't wearing my glasses that day
To share my experiences with you:
On my set of two WL-500g's WDS does work with WPS-PSK and AES (on Channel 11).
Both are in AP mode and one of them is connected to a router.
Have to say that bigpond "heartbeat" is 100% stable.
Now if only asus could import olegs fixes into their firmware.
thanks oleg
P.S. In upcoming firmware.....i'd like to see the following things.....i'm sure this isn't the right place to post it....but here it is anyway! Do you think any of these things is likely/possible???
1.. OoB packets support (Currently the WL500g ignores them)
2.. QoS support...im about to get VOIP (so this would be helpful)
3.. UPnP ports never closed bug fixed....annoying and a security hole
Last edited by Wesleyrpg; 21-03-2005 at 05:28.
jbrbv : I'm trying to get the same setup working, and have both my WL-500g's set up as you have said above, but still cant get bridging working - could you please give more information on your wireless settings that you used to getthis to work - my WL-500g's are on v1.9.2.7 CR4 and the other details are in the attached pdf - any help you could give would be very much appreciatedOriginally Posted by jbrbv