Firmware v1.9.2.7 CR4 [Oleg]

[mullog]

Hi I followed your instructions but I get the following error when trying to do
ipkg.sh update



Downloading http://wl500g.dyndns.org/ipkg/Packages ...
wget: //opt/tmp/ipkg/Packages: No such file or directory
ipkg_download: ERROR: Failed to retrieve http://wl500g.dyndns.org/ipkg/Packages, returning
ipkg_update: Error downloading http://wl500g.dyndns.org/ipkg/Packages to /opt/lib/ipkg/lists/wl500g

Any Ideas?
has anyone tested the mt-daapd package? any chance that it would work
http://www.nslu2-linux.org/wiki/Unslung/Mt-daapd
and thx for the great work.

#!/bin/sh
mount -text3 -oloop,noatime /tmp/harddisk/opt.ext3 /opt

installing packages (install real ipkg first):

ipkg.sh update
ipkg.sh install ipkg

Once done:

echo "src unslung http://wl500g.dyndns.org/unslung" >> /opt/etc/ipkg.conf
ipkg update
ipkg list

[rwhitby]

Downloading http://wl500g.dyndns.org/ipkg/Packages ...
wget: //opt/tmp/ipkg/Packages: No such file or directory
Any Ideas?
has anyone tested the mt-daapd package? any chance that it would work
http://www.nslu2-linux.org/wiki/Unslung/Mt-daapd
and thx for the great work.

Add "mkdir -p /opt/tmp/ipkg" to the instructions.

No reason I can think of why mt-daapd won't work ...

-- Rod

[int]

Oleg

fw 1.9.2.7 CR4 [Oleg]

!!!reboot issue!!!

[hobbes]

Hi,

just installed this firmware to try and get a webcam to work and try as I might whenever I change the webcam driver from pwc 8.8 to OV511 2.10 and do a save and restart its back to pwc 8.8

the webcam is a trust 150 spacecam portable which I believe needs the OV driver?

I have been unable to do this with any firmware I have tried up to now

[hugo]

If the cam revert to a PWC driver, it mean it is not properly reconised. You will need to try another webcam, or to get working drivers for it. I think somebody posted drivers for other webcam, but you will have to search for them. Not sure they will work.

[hobbes]

If the cam revert to a PWC driver, it mean it is not properly reconised. You will need to try another webcam, or to get working drivers for it. I think somebody posted drivers for other webcam, but you will have to search for them. Not sure they will work.

thanks for that, its my first time trying custom firmware so support is most welcome, tried 3 webcams now and i can see in the status log that they are not recognised, don't know if i can afford to buy to many more

[WlanMan]

Hi

thanks for that, its my first time trying custom firmware so support is most welcome, tried 3 webcams now and i can see in the status log that they are not recognised, don't know if i can afford to buy to many more

You only need to check the Asus Handbook for supported cams. If none fits your needs go into shops near you and see which ones they sell, tehn look up google for the used chipset (ovv5xx or philips). Cheap is the Terracam Pro if you get one, and good are the bigger Logitech ones... or ask ebay .

Greets

[jbrbv]

To share my experiences with you:
On my set of two WL-500g's WDS does work with WPS-PSK and AES (on Channel 11).
Both are in AP mode and one of them is connected to a router.