maybe a silly question: did you mount it somewhere?
how is your smb.conf?
Hi
I flash my wlhdd with 1.9.2.7-3c and it's ok
But i don't see the HDD (toshiba 80G)in my networks,
and i don't see the wlhdd in samba networks Winxp sp2
What can i do
Thanks
maybe a silly question: did you mount it somewhere?
how is your smb.conf?
Post the intersting parts of your systemlog and /var/log/nmb and /var/log/smb
OK
but how i do, i don't know linux
How activate samba server on oleg firmware for ide disk
Thanks for your help
Search this forum and visit http://wl500g.dyndns.org It's nessesary reading...
ok
i read this
"Be sure you've specified hostname in the LAN IP Setting (this name will used be by samba)"
it's ok
"add the following to your /usr/local/sbin/post-boot script):
/usr/sbin/smbd -D
/usr/sbin/nmbd -D"
ok but how do this
Thanks
Read the wl500g.dyndns.org page again. It's all there, but requires some Linux knowledge and DYI work. The firmwares from Oleg for the WL-HDD require some setting up for samba it to work directly on the WL-HDD. This is because these firmwares are originally meant for the WL-500(b)(g)(gx) routers.
Another option is to flash an official Asus WL-HDD firmware or a custom firmware from JOKEYW2000. In these firmwares Samba works right out of the box.
Thanks for your help
I know firmware from JOKEYW2000 and it's very good, but i want to use webcam
Thanks
You can read the end of this thread for more help about setting up samba
ok thanks
Where i place smb.conf on harddisk
in /etc folder, in ram. You must edit you .file to save this using flashfs save commit enable, according to the isntruction in this page: http://wl500g.dyndns.org
how copy in etc folder in ram
thanks
For the rest i read your link and i think it's ok
are you using a telnet interface? if so do a cp /folder/your_source_file /etc
BIG BIG BIG THANKS
all it's ok
Telnet not ok, now he says "login failed"
login:admin
password:admin
Before it's ok