WebCam - SPCA50x drivers

[Saros]

How can i use it with 500w? I need step by step manual

[oxygen121]

sorry for my bad english.
Please make new version driver for wl500.
On page http://mxhaard.free.fr/download.html current version drivers 1.00.20 date: 24/12/2007

[pripps]

Hello

It seems to work for me, but I do not know how to chek it from a Windows machine?

KR

[pepek]

Hello,
I have problem with my webcam Trust WB-1400T on WL-500gP.
I have insmod /tmp/harddisk/modules/spca5xx.o in post-mount. Modul was installed but the camera wasn't not detected .

Where can be problem ? I have Oleg firmware 1.9.2.7-9.

[dyonisos]

the WB-1400T need a PAC207 controller/driver and will not work with spca5xx.

[ncruz]

Here's a new version of the driver, the latest for v4l.

I couldn't get it to work with my QC express (0x092f), the source is ok but I always get no driver registered for this device...

Maybe someone can try it and get better results.

[vvs123]

The same spca5xx driver with some fixes: http://wl500g.info/showpost.php?p=147904&postcount=29

You can give it a try, no guaranty it'll work though.

[polius]

hello all
first, sorry for my poor english.
i have Vimicro Zc301P (vid: 0x0ac8 pid: 0x303b), i download spca5xx-20060501 from http://mxhaard.free.fr/download.html, the original driver working on my Gentoo (kernel 2.6.16-r7) but WL-500b (kernel 2.4.20) is fail.

i fixed spca5xx-20060501, now it working on WL-500b ok, but rcamd is unsupport spca5xx driver, so i cross-compile spcaserv for WL-500b, the spcaserv now working on WL-500b ok and you can use spcaview in you linux-box see camera video.

thank mxhaard!

download compiled bin file
steps:
1. put spca5xx.o and spcaserv to WL-500b(g)
2. insmod spca5xx.o
3. ./spcaserv -d /dev/video -f jpg -s 320x240
4. in you linux-box, run spcaview -w IP

-----------------------------------------------------------------------------------
i upload spca5xx-20060501.path and spcaserv-mips.tar.gz for somebody
spca5xx steps:
1. download original spca5xx-20060501.tar.gz
2. tar zxvf spca5xx-20060501.tar.gz
3. download spca5xx-20060501.path, put to spca5xx-20060501 path.
4. cd spca5xx-20060501
5. patch -p1 < spca5xx-20060501.patch
6. modify KINCLUDE in Makefile, e.g. /home/xxx/wl500b_dev/broadcom/src/linux/linux
7. make
8. upload to WL-500b and insmod spca5xx.o

spcaserv steps:
1. download original spcaserv.tar.gz
2. tar zxvf spcaserv.tar.gz
3. cd spcaserv
4. make
5. upload to WL-500b and run spcaserv
./spcaserv -d /dev/video -f jpg -s 320x240

Can you help me? How I can upload spca5xx.o to WL-500?