I have a little problem with my wl 500b router.
I've installed a new firmware (WL500b-22.214.171.124-9.trx) and got access to new functionalities (among which, telnet).
Then while reading some posts, i found out that i could extend RAM memory to 32Mb instead of 16. So I've tried (NVRAM settings but don't remeber the exact instructions)
my router restarted but since then I couldn't get access. nothing seems to work. (no ping no tenet no wireless )
- I've tried reseting (using the restore button) but it didn't work.
- I tried nvram restore (wl500g-clear-nvram.trx and wl500g-recover.trx) but can't get to upload the files to my router
=> get error message when trying upload using firmware restore utility
=> get timeout message when trying the tftp transfer (tftp -i 192.168.1.1 PUT wl500g-clear-nvram.trx)
Can someone give me a clue on how to handle this ? almost all posts are about the WL500G and I couldn't find anything about the 500b