Seems like when I have a torrent of a large size 4GB and over my speed just craps out for ALL torrents... When I push the large torrent to suspended my speed is back to normal for the other torrents... I usually have a load of 1.7...
How do i make admin a guest acount??
Seems like when I have a torrent of a large size 4GB and over my speed just craps out for ALL torrents... When I push the large torrent to suspended my speed is back to normal for the other torrents... I usually have a load of 1.7...
is there any way that I can enable my uploads working?
I have latest transmission and still the same 0% upload.
Kind regards
Help me on editing transmission.conf .
i'am edit transmission.conf to limit ul , but ....
my transmission.conf ...
GROUP=root
DATE_FORMAT="%d %h %H:%M"
# Transmission daemon variables
PIDFILE=/opt/var/run/transmission.pid
ACTIVE=/tmp/harddisk/torrent/active-torrents.txt
HOME=/tmp/harddisk/torrent
WATCHDOG=300
LISTENING_PORT=65534
# set SPEED in kB/s or -1 for unlimited
UPLOAD_SPEED=-5
DOWNLOAD_SPEED=-1
#UPLOAD_SPEED=5
#DOWNLOAD_SPEED=180
# uncomment the following if encryption is preferred
# ENCRYPTION=-e
# uncomment the following if encryption is required
# ENCRYPTION="-ee"
# change SYSLOG from /tmp/syslog.log to
SYSLOG=/opt/var/log/syslog.log
#Uncomment the following for UPNP NAT traversal
#NAT_TRAVERSAL=--nat-traversal
# Seed torrent after completition (YES or NO)
AUTOSEED="YES"
# Enable removing of DONE non-seeding torrents in ${TARGET} directory
# FORCE_REMOVE="YES"
# If the following limit is reached watchdog will not enqueue new one
MAX_ACTIVE_TORRENTS=5
# Creating graphical log of transfer with gnuplot
# can be very site specific issue. See transmission.cgi
# how this variables are used.
GNUPLOT=/opt/bin/gnuplot
GNUPLOT_COMMAND=${WORK}/transfer.gnuplot
GNUPLOT_DATA=${WORK}/transfer.data
GNUPLOT_OUTPUT=/opt/share/www/transfer.png
HTTP_IMG_LOCATION=../transfer.png
#TZ offset in seconds
# Configuration
# NOTE: no spaces around the = sign
# the config will be sourced (eg. . transmission.conf)
SOURCE=/tmp/harddisk/torrent/source
WORK=/tmp/harddisk/torrent/work
TARGET=/tmp/harddisk/torrent/target
#MAILTO=torrent@somedomain.com
#MAILFROM=torrent@somedomain.com
MAILOPT="-smail.somedomain.com -f"
USER=admin
GROUP=root
DATE_FORMAT="%d %h %H:%M"
# Transmission daemon variables
PIDFILE=/opt/var/run/transmission.pid
ACTIVE=/tmp/harddisk/torrent/active-torrents.txt
HOME=/tmp/harddisk/torrent
WATCHDOG=300
LISTENING_PORT=65534
# set SPEED in kB/s or -1 for unlimited
UPLOAD_SPEED=-5
DOWNLOAD_SPEED=-1
#UPLOAD_SPEED=5
#DOWNLOAD_SPEED=180
# uncomment the following if encryption is preferred
# ENCRYPTION=-e
# uncomment the following if encryption is required
# ENCRYPTION="-ee"
# change SYSLOG from /tmp/syslog.log to
SYSLOG=/opt/var/log/syslog.log
#Uncomment the following for UPNP NAT traversal
#NAT_TRAVERSAL=--nat-traversal
# Seed torrent after completition (YES or NO)
AUTOSEED="YES"
# Enable removing of DONE non-seeding torrents in ${TARGET} directory
# FORCE_REMOVE="YES"
# If the following limit is reached watchdog will not enqueue new one
MAX_ACTIVE_TORRENTS=5
# Creating graphical log of transfer with gnuplot
# can be very site specific issue. See transmission.cgi
# how this variables are used.
GNUPLOT=/opt/bin/gnuplot
GNUPLOT_COMMAND=${WORK}/transfer.gnuplot
GNUPLOT_DATA=${WORK}/transfer.data
GNUPLOT_OUTPUT=/opt/share/www/transfer.png
HTTP_IMG_LOCATION=../transfer.png
#TZ offset in seconds. Use +- sign. DST manually
TIMEZONE_OFFSET=+3600
#Colors for command line. # comment out if not needed
GREEN="\033[32;1m"
#NC="\033[0m"
#BACK_UP="\033[1K\033[0G"
NORMAL="\033[0m"
WARN="\033[33;1m"
BAD="\033[31;1m"
BOLD="\033[1m"
GOOD="\033[32;1m"
You have set it to "-5" which is probably same as "-1" = unlimited...
Loose the negative sign and set it to "5":
Out of topic... upload limit of 5 kb/s? You are kidding rightCode:UPLOAD_SPEED=5
I use transmission 1.22 on my wl-500gP(with latest Oleg fw), it work's perfectly except on larger torrents (15+Gb). Download speed drops to few kb/s, number of seeders is irrelevant (i tried torrents from 1 seeder to hundreds of seeders).
Is it simply hardware limitation(system load goes up to 2-3) or I can do something about it?
Hi,
i _guess_ this is because of the hardware limitations.
hopefully you have swap activated.
One more thing you can test is http://wl500g.info/showpost.php?p=102442&postcount=317
maybe this is just me, but after installing bash my torrents became faster.... subjective impression....
wengi
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
The problem with larger torrents above 40GB is oftenly a cause of excesive disk head movements and a lack of memory for its caching.
Thanks, I'll try installing bash. I have swap activated of course.
BUMP BUMP BUMP
ups
this is normaly done in the config and should allready be if you use the builtin.
doe a search for the samba conf file.
Alternatively use another conf as described in my howto.
wengi
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
hi, i'm not able to install transmission:any help?Downloading http://ipkg.nslu2-linux.org/feeds/op...2-2_mipsel.ipk
wget: server returned error 404: HTTP/1.1 404 Not Found
Nothing to be done
An error ocurred, return value: 22.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget -q -P /opt/ipkg-iPk9aM http://ipkg.nslu2-linux.org/feeds/op...2-2_mipsel.ipk'
Failed to download transmission. Perhaps you need to run 'ipkg update'?
Hi,
autobuild seems to have a prob.
Wait one or two days...
wengi
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
I want to change the transmission access port from 8008 to something else how do i do this. I tried to google but no definite results can anyone help me pls.
Another problem is I have the inbuilt ftp running and disabled anonymous logs on but however my brother is able to log on to FW in built ftp. Just to give you guys a better idea he is calgary im in thunderbay. I used someone else connection in thunderbay and was not able to log on as anonymous but he is some how able to connect to the ftp even after i disabled the anonymous log on in FW webpage any reasons.