port forwarding

[bruno77]

hi
i am french and not clever in english and network.
i ve just installed my router wl500g + freebox + epson stylus color 600 + 3 ethernet pc.

if i check Status and Log-Port forwarding; i find :
Destination Proto. Port Range Redirect to
82.231.99.210 UDP 4672 192.168.1.4
82.231.99.210 TCP 4662 192.168.1.4
82.231.99.210 TCP 1736 192.168.1.2
82.231.99.210 TCP 3527 192.168.1.2

port 4672 and 4662 for emule ; i open them in virtual server list.( and it works fine)
but i dont understand why port 1736 and 3527 are redirect to pc 192.168.1.2. ( these port does not appear in port trigger or virtual server list )

my question: how can these port automaticaly redirect to pc 192.168.1.2 ? What shall i do if dangerous for security?

my last question is about wireless:
i have a a620 pda with wl110 wifi card; pda is recognised by routeur; Ping from lan to pda is ok; but i cannot go on internet with pda nor on lan;
i have nothing to configure the wireless firewall on my wl500g ( fimware 1.9.2.7)

thanks for help

[Oleg]

but i dont understand why port 1736 and 3527 are redirect to pc 192.168.1.2. ( these port does not appear in port trigger or virtual server list )

my question: how can these port automaticaly redirect to pc 192.168.1.2 ? What shall i do if dangerous for security?

Probably you've upnp enabled.

[bruno77]

yes
upnp enable.
i am going to disable and check status port forwarding
bruno

[bruno77]

i ve disable upnp

but nothing change in status port forwarding

maybe, this is not important
or change during next reboot of router

[Styno]

i ve disable upnp

but nothing change in status port forwarding

maybe, this is not important
or change during next reboot of router

If you've changed a setting in the webinterface, you should reboot to activate the setting.

[bruno77]

nothing change after reboot.
same port forward

what's about wireless and my pda; do you have an idea; why can't i connect internet. ping to pda is good.
i change nothing in wireless interface; only accept mac adress with the adress of my card wl110.
internet firewall is enable
web access from wan is not enable. ( i suppose wan is internet network; not my lan with my 3 pc and my pda )
lan to wan filter : yes
wan to lan filter : no

thanks for help

[bruno77]

what should be the best solution for my config:
home gateway
router
access point

i have a lan with 3 pc ethernet and would like to add a wireless connection ( pda a620 with wl110 card)

thanks

[Styno]

Home gateway

[bruno77]

thanks for this