Changes since 1.9.2.7-8:

  • Added RTC support for the WL-HDD/WL-700g boards
  • Fixed a bug causing lockups during reboot
  • SNMP: uptime values no longer depends on the system time
  • UPnP: it's now possible to select interface for which interface address reported back to clients (IP Config - Misc), port-forwards are working just like other virtual servers
  • UPnP: additionally protected by built-in firewall in case when multicast forwards enabled
  • IPTV: added udpxy (check IP Config - Miscellaneous: IPTV UDP Multicast to HTTP Proxy Port) to enable-disable it
  • Added Get IP automatically option to the WAN & LAN page
  • DHCP: added support for some broken DHCP servers (e.g. Golden Telecom)
  • Manual DNS server entries are no longer added to routing table
  • Fixed Redirects in the web-iface (it should no longer redirect to internal address);
  • Enabled Idle Disconnect functionality for PPPoE/PPTP. It's recomended to turn this feature off by typing zero in this field.
  • L2TP speed increase (up to 2.5 times compared to previous versions) and correct tunnel termination
  • PPTP sync option is now correctly handled and enabled by default, improved overall stability, cleared up logs;
  • Updated QuickSetup to recent PPPoE, PPTP and L2TP changes
  • Added fine grained WPA control on the Wireless page: added separate WPA Enterprise, WPA2 Enterprise, WPA Personal, WPA2 Personal and WPA-Auto-Personal (which is wpa-psk + wpa2-psk for TKIP+AES, wpa-psk for TKIP and wpa2-psk for AES).
  • Added Regulatory Mode field (802.11d/802.11h/off) to the Wireless - Advanced page. This should fix some problems with Intel WiFi cards (select 802.11d mode).
  • Virtual Servers has now separate default action in the WAN to LAN firewall.
  • Added Host Name field to the Manual DHCP MAC list.
  • Added Comment field to Wireless - Access list.
  • FTP: switched to vsftpd, reworked web-iface.
  • Samba: extended web-iface, new share modes - all partitions, manual share list.
  • Samba: Windows Vista support, W2K3SP1 compatibility
  • Added utf8 as default encoding of the hard/flash drive (enabled by default).
  • NFS: fixed some /etc/exports problems

Other changes:
  • Kernel modules are now stored in single directory
  • Added ftdi_sio usb to serial converter module
  • Some other modules are now available as separate download (modules-1.9.2.7-9.tgz), includes HID, input, Bluetooth. Unpack them to /opt
  • Added modprobe, which is looking for /opt/lib/modules/... by default.
  • USB updates
  • VLAN support fixes, updated robocfg
  • dropbear 0.50 (credits to lly), enabled inetd support
  • busybox_httpd fixes: new cgi environment vars (HTTP_HOST, CGI_*)
  • Changed a way how automount works: everything is mounted to /tmp/mnt now, while /tmp/harddisk is just a symbolic link to first partition
  • Samba/FTP/NFS relative paths are against /tmp/harddisk
  • Added /usr/local/sbin/pre-mount to be called before automount (suitable to manual mounts, disk checks, etc).
  • Added Enable USB Storage selection to the System Setup - Services page to enable usb storage modules to load automatically
  • Added filesystem type autodetection to automount portition


Grab it here