Page 1 of 2 12 LastLast
Results 1 to 15 of 50

Thread: New Kamikaz 7.09 image

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190

    New Kamikaze 7.09 image

    Over the last few days I created a new kamikaze 7.09 Image.
    It is able to boot off the hdd and boot off usb

    http://wl700g.homelinux.net/drupal/?q=node/146
    Last edited by back2basic; 22-10-2007 at 17:54.

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  2. #2
    Quote Originally Posted by back2basic View Post
    Over the last few days I created a new kamikaze 7.09 Image.
    It is able to boot off the hdd and boot off usb

    http://wl700g.homelinux.net/drupal/?q=node/146
    What about problem with boot properly when the power cord has been removed for several hours?

  3. #3
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190
    gonne test it tommorrow

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  4. #4
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190
    Here is my shutdown and after 15 min my boot.

    I created a new image that waits another 5 sec more than the old before it checks to boot because I noticed that it takes about 11/12 sec to let the disc spinnup. the timer on the old images where 10 sec now its 15 sec before it boots..
    Last edited by back2basic; 25-10-2007 at 17:31.

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  5. #5
    Quote Originally Posted by back2basic View Post
    Here is my shutdown and after 15 min my boot.

    I created a new image that waits another 5 sec more than the old before it checks to boot because I noticed that it takes about 11/12 sec to let the disc spinnup. the timer on the old images where 10 sec now its 15 sec before it boots..
    I can't see the movies
    But i should to know - it works(boot) without problems or now?

  6. #6
    Try your new FW from http://wl700g.homelinux.net/drupal/?...es/kam7.09.trx

    after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready light just flashing and can't stop, i don't know why, i thing my HDD didn't spin down well and now i have that problem

  7. #7
    How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?

  8. #8
    Quote Originally Posted by SliderMKH6 View Post
    How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?
    you will probably find it too overwhelming if you have no experience working in a command prompt... Anyways there are some great step-by-step guides here: http://http://wl700g.homelinux.net/drupal/?q=node/145

    But again, ask yourself what you want to accomplish by switching firmware. You can install a web gui, much like the ASUS one, but not as user friendly, and besides you'll still need to do some work in the command prompt.
    /regards
    Henrik

  9. #9
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190
    Quote Originally Posted by SliderMKH6 View Post
    How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?
    to config the router I use dropbear and x-wrt(pictures @ http://x-wrt.org)
    After the complete setup of the system you have several different web if
    expl. one for the mldonkey, one for you lightppd webserver(php & mysqladmin), one for sabnzbd

    the firmware is only 1,85 MB but after completion its about 500 MB ( Mine is )

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  10. #10
    Quote Originally Posted by back2basic View Post
    Over the last few days I created a new kamikaze 7.09 Image.
    It is able to boot off the hdd and boot off usb

    http://wl700g.homelinux.net/drupal/?q=node/146
    I installed the kam7.09 image. It seems to be running well enough and stable.

    However, one thig I did notice: when I run top, it reports that over 90% CPU is occupied all of the time, oscillating between the following two tasks:

    Code:
     9695 root     R        516  9689 97.4  0.8 hotplug-call
    Code:
     9705 root     R        528   622 97.8  0.8 default.script
    This doesn't seem right to me. Any ideas?

    When I run htop, it tells me that the default.script is related to udhcpc.

    I suspect that someone might be trying to "appropriate" some of my wireless bandwidth.
    Last edited by hal2k1; 29-10-2007 at 03:48.

  11. #11
    Quote Originally Posted by hal2k1 View Post
    I installed the kam7.09 image. .
    Another thing I noticed:
    Code:
    Oct 29 20:18:28 (none) lpr.notice p9100d[9365]: Connection from 192.168.1.36 port 4355 accepted
    Oct 29 20:18:28 (none) lpr.err p9100d[9365]: /dev/usb/lp0: No such file or directory
    Oct 29 20:18:30 (none) lpr.notice p9100d[9365]: Finished job: 379372 bytes received, 0 bytes sent
    The USB ports don't seem to be working, and the connected USB printer is not seen. This means that it does not work as a print server any more.

    Code:
    root@OpenWrt:/# ls /dev/usb/
    root@OpenWrt:/# ls /dev/
    console   full      kmem      mtd       nvram     ptmx      random    shm       urandom
    cua       gpio      log       mtdblock  port      pts       root      tts       usb
    discs     ide       mem       null      ppp       pty       scsi      tty       zero
    Having said that, Samba 3.0 is better than previous OpenWrt offerings for Samba.

  12. #12
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190
    did you installed the ipkg for usb printer (kmod-usb-printer)
    whem my box is idle the top looks like this

    Code:
    Mem: 61644K used, 1284K free, 0K shrd, 25340K buff, 18396K cached
    Load average: 0.00 0.00 0.00
      PID USER     STATUS   RSS  PPID %CPU %MEM COMMAND
    16205 root     R        436 16202  1.1  0.6 top
    16201 root     S        564   562  0.1  0.8 dropbear
      669 root     S       5712     1  0.0  9.0 SABnzbd.py
      738 root     S       5712   670  0.0  9.0 SABnzbd.py
      733 root     S       5712   670  0.0  9.0 SABnzbd.py
      737 root     S       5712   670  0.0  9.0 SABnzbd.py
      735 root     S       5712   670  0.0  9.0 SABnzbd.py
      734 root     S       5712   670  0.0  9.0 SABnzbd.py
      674 root     S       5712   670  0.0  9.0 SABnzbd.py
      684 root     S       5712   670  0.0  9.0 SABnzbd.py
      670 root     S       5712   669  0.0  9.0 SABnzbd.py
      671 root     S       5712   670  0.0  9.0 SABnzbd.py
      672 root     S       5712   670  0.0  9.0 SABnzbd.py
      673 root     S       5712   670  0.0  9.0 SABnzbd.py
      732 root     S       5712   670  0.0  9.0 SABnzbd.py
      742 root     S       5712   670  0.0  9.0 SABnzbd.py
      740 root     S       5712   670  0.0  9.0 SABnzbd.py
      675 root     S       5712   670  0.0  9.0 SABnzbd.py
      676 root     S       5712   670  0.0  9.0 SABnzbd.py
      743 root     S       5712   670  0.0  9.0 SABnzbd.py
      739 root     S       5712   670  0.0  9.0 SABnzbd.py
    Code:
    root@OpenWrt:~# uptime
     12:52:24 up 20:38, load average: 0.00, 0.00, 0.00

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  13. #13
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    190
    Code:
    root@OpenWrt:~# logread -f
    Oct 29 12:56:34 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 2
    Oct 29 12:56:34 (none) user.warn kernel: usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver.
    Code:
    root@OpenWrt:~# ipkg install kmod-usb-printer
    Installing kmod-usb-printer (2.4.34-brcm-1) to root...
    Downloading http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/packages/./kmod-usb-printer_2.4.34-brcm-1_mipsel.ipk
    Configuring kmod-usb-printer
    Done.
    Code:
    root@OpenWrt:~# logread -f
    Oct 29 12:57:47 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 3
    Oct 29 12:57:47 (none) user.info kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
    I think it should work

    Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net

    My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)

  14. #14
    back2basic: Could you upload the image with the longer boottime, so we can get to mount our harddrives?

    Thanks in advance
    /regards
    Henrik

  15. #15
    Quote Originally Posted by hal2k1 View Post
    I installed the kam7.09 image. It seems to be running well enough and stable.

    However, one thig I did notice: when I run top, it reports that over 90% CPU is occupied all of the time, oscillating between the following two tasks:

    Code:
     9695 root     R        516  9689 97.4  0.8 hotplug-call
    Code:
     9705 root     R        528   622 97.8  0.8 default.script
    I fixed this issue. It was due to using dhcp for both the router's connection to the ADSL modem and on the lan.

    I set the ADSL modem to bridge mode, and I made sure that I had all of the pppoe related packages installed.
    Code:
    ipkg list_installed | grep ppp
    kmod-ppp - 2.4.34-brcm-1 -
    kmod-pppoe - 2.4.34-brcm-1 -
    ppp - 2.4.3-8 -
    ppp-mod-pppoe - 2.4.3-8 -
    Then I modified /etc/config/network file so that it read:
    Code:
    config interface        wan
            option ifname   "eth0.1"
            option proto    pppoe
            option macaddr  "00:17:31:c5:41:79"
            option username "user@isp.com"
            option password "password"
            option keepalive 10
    ... but with the correct username & password, of course.

    Now it is all sweet.

    Kam 7.09 is now stable and working OK.

    If I get brave, I am going to add a web server next ...

Page 1 of 2 12 LastLast

Similar Threads

  1. Imagemagick / identify without any image format
    By JochenR in forum WL-500gP Q&A
    Replies: 1
    Last Post: 14-12-2007, 18:12
  2. How do I capture a picture & ftp image?
    By Cx_Jx in forum WL-500gP Q&A
    Replies: 1
    Last Post: 16-12-2006, 11:07
  3. Who is pressing the camera button ?
    By max2950 in forum WL-500g Q&A
    Replies: 0
    Last Post: 19-11-2006, 08:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •