Over the last few days I created a new kamikaze 7.09 Image.
It is able to boot off the hdd and boot off usb
http://wl700g.homelinux.net/drupal/?q=node/146
Over the last few days I created a new kamikaze 7.09 Image.
It is able to boot off the hdd and boot off usb
http://wl700g.homelinux.net/drupal/?q=node/146
Last edited by back2basic; 22-10-2007 at 16:54.
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
gonne test it tommorrow
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Last edited by back2basic; 25-10-2007 at 16:31.
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Try your new FW from http://wl700g.homelinux.net/drupal/?...es/kam7.09.trx
after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready light just flashing and can't stop, i don't know why, i thing my HDD didn't spin down well and now i have that problem
How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?
you will probably find it too overwhelming if you have no experience working in a command prompt... Anyways there are some great step-by-step guides here: http://http://wl700g.homelinux.net/drupal/?q=node/145
But again, ask yourself what you want to accomplish by switching firmware. You can install a web gui, much like the ASUS one, but not as user friendly, and besides you'll still need to do some work in the command prompt.
/regards
Henrik
to config the router I use dropbear and x-wrt(pictures @ http://x-wrt.org)
After the complete setup of the system you have several different web if
expl. one for the mldonkey, one for you lightppd webserver(php & mysqladmin), one for sabnzbd
the firmware is only 1,85 MB but after completion its about 500 MB ( Mine is )
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
I installed the kam7.09 image. It seems to be running well enough and stable.
However, one thig I did notice: when I run top, it reports that over 90% CPU is occupied all of the time, oscillating between the following two tasks:
Code:9695 root R 516 9689 97.4 0.8 hotplug-callThis doesn't seem right to me. Any ideas?Code:9705 root R 528 622 97.8 0.8 default.script
When I run htop, it tells me that the default.script is related to udhcpc.
I suspect that someone might be trying to "appropriate" some of my wireless bandwidth.
Last edited by hal2k1; 29-10-2007 at 02:48.
Another thing I noticed:
The USB ports don't seem to be working, and the connected USB printer is not seen. This means that it does not work as a print server any more.Code:Oct 29 20:18:28 (none) lpr.notice p9100d[9365]: Connection from 192.168.1.36 port 4355 accepted Oct 29 20:18:28 (none) lpr.err p9100d[9365]: /dev/usb/lp0: No such file or directory Oct 29 20:18:30 (none) lpr.notice p9100d[9365]: Finished job: 379372 bytes received, 0 bytes sent
Having said that, Samba 3.0 is better than previous OpenWrt offerings for Samba.Code:root@OpenWrt:/# ls /dev/usb/ root@OpenWrt:/# ls /dev/ console full kmem mtd nvram ptmx random shm urandom cua gpio log mtdblock port pts root tts usb discs ide mem null ppp pty scsi tty zero
did you installed the ipkg for usb printer (kmod-usb-printer)
whem my box is idle the top looks like this
Code:Mem: 61644K used, 1284K free, 0K shrd, 25340K buff, 18396K cached Load average: 0.00 0.00 0.00 PID USER STATUS RSS PPID %CPU %MEM COMMAND 16205 root R 436 16202 1.1 0.6 top 16201 root S 564 562 0.1 0.8 dropbear 669 root S 5712 1 0.0 9.0 SABnzbd.py 738 root S 5712 670 0.0 9.0 SABnzbd.py 733 root S 5712 670 0.0 9.0 SABnzbd.py 737 root S 5712 670 0.0 9.0 SABnzbd.py 735 root S 5712 670 0.0 9.0 SABnzbd.py 734 root S 5712 670 0.0 9.0 SABnzbd.py 674 root S 5712 670 0.0 9.0 SABnzbd.py 684 root S 5712 670 0.0 9.0 SABnzbd.py 670 root S 5712 669 0.0 9.0 SABnzbd.py 671 root S 5712 670 0.0 9.0 SABnzbd.py 672 root S 5712 670 0.0 9.0 SABnzbd.py 673 root S 5712 670 0.0 9.0 SABnzbd.py 732 root S 5712 670 0.0 9.0 SABnzbd.py 742 root S 5712 670 0.0 9.0 SABnzbd.py 740 root S 5712 670 0.0 9.0 SABnzbd.py 675 root S 5712 670 0.0 9.0 SABnzbd.py 676 root S 5712 670 0.0 9.0 SABnzbd.py 743 root S 5712 670 0.0 9.0 SABnzbd.py 739 root S 5712 670 0.0 9.0 SABnzbd.pyCode:root@OpenWrt:~# uptime 12:52:24 up 20:38, load average: 0.00, 0.00, 0.00
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Code:root@OpenWrt:~# logread -f Oct 29 12:56:34 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 2 Oct 29 12:56:34 (none) user.warn kernel: usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver.Code:root@OpenWrt:~# ipkg install kmod-usb-printer Installing kmod-usb-printer (2.4.34-brcm-1) to root... Downloading http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/packages/./kmod-usb-printer_2.4.34-brcm-1_mipsel.ipk Configuring kmod-usb-printer Done.I think it should workCode:root@OpenWrt:~# logread -f Oct 29 12:57:47 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 3 Oct 29 12:57:47 (none) user.info kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
back2basic: Could you upload the image with the longer boottime, so we can get to mount our harddrives?
Thanks in advance
/regards
Henrik
I fixed this issue. It was due to using dhcp for both the router's connection to the ADSL modem and on the lan.
I set the ADSL modem to bridge mode, and I made sure that I had all of the pppoe related packages installed.
Then I modified /etc/config/network file so that it read:Code:ipkg list_installed | grep ppp kmod-ppp - 2.4.34-brcm-1 - kmod-pppoe - 2.4.34-brcm-1 - ppp - 2.4.3-8 - ppp-mod-pppoe - 2.4.3-8 -
... but with the correct username & password, of course.Code:config interface wan option ifname "eth0.1" option proto pppoe option macaddr "00:17:31:c5:41:79" option username "user@isp.com" option password "password" option keepalive 10
Now it is all sweet.
Kam 7.09 is now stable and working OK.
If I get brave, I am going to add a web server next ...