New Kamikaz 7.09 image

[bado]

Over the last few days I created a new kamikaze 7.09 Image.
It is able to boot off the hdd and boot off usb

http://wl700g.homelinux.net/drupal/?q=node/146

What about problem with boot properly when the power cord has been removed for several hours?

[back2basic]

gonne test it tommorrow

[back2basic]

Here is my shutdown and after 15 min my boot.

I created a new image that waits another 5 sec more than the old before it checks to boot because I noticed that it takes about 11/12 sec to let the disc spinnup. the timer on the old images where 10 sec now its 15 sec before it boots..

[bado]

Here is my shutdown and after 15 min my boot.

I created a new image that waits another 5 sec more than the old before it checks to boot because I noticed that it takes about 11/12 sec to let the disc spinnup. the timer on the old images where 10 sec now its 15 sec before it boots..

I can't see the movies
But i should to know - it works(boot) without problems or now?

[bado]

Try your new FW from http://wl700g.homelinux.net/drupal/?...es/kam7.09.trx

after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready light just flashing and can't stop, i don't know why, i thing my HDD didn't spin down well and now i have that problem

[back2basic]

Try your new FW from http://wl700g.homelinux.net/drupal/?...es/kam7.09.trx

after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready light just flashing and can't stop, i don't know why, i thing my HDD didn't spin down well and now i have that problem

When the ready light keps flashing after the box is booted for the first time
Hold down the ez setup button and push the reset button, now let the ready light blink 1 time and then let go off the ez setup button ( Now the firmware is being rebuild and its boots when ready)

[bado]

When the ready light keps flashing after the box is booted for the first time
Hold down the ez setup button and push the reset button, now let the ready light blink 1 time and then let go off the ez setup button ( Now the firmware is being rebuild and its boots when ready)

OK! i've done it and it's start to boot, but! with problems
The power button light - ok, ready light - ok, and nothing! no ping no something else!

[milky]

Hello,

I am a happy user of the Kfurge image and personally I don't have valid reasons to switch to OpenWrt but one: 2.6 kernel. Unfortunately, I guess that kam7.09.trx image is based on the "brcm-2.4" platform which means a 2.4 kernel. Anyone interested in building a "brcm47xx-2.6" based image (kernel 2.6)?

[SliderMKH6]

How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?

[n00ben]

How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?

you will probably find it too overwhelming if you have no experience working in a command prompt... Anyways there are some great step-by-step guides here: http://http://wl700g.homelinux.net/drupal/?q=node/145

But again, ask yourself what you want to accomplish by switching firmware. You can install a web gui, much like the ASUS one, but not as user friendly, and besides you'll still need to do some work in the command prompt.

[back2basic]

How does it work? Do i got a GUI for config the router? The Firmware is only 1,85 MB big -.-. Can someone describe it with pictures or make an video please?

to config the router I use dropbear and x-wrt(pictures @ http://x-wrt.org)
After the complete setup of the system you have several different web if
expl. one for the mldonkey, one for you lightppd webserver(php & mysqladmin), one for sabnzbd

the firmware is only 1,85 MB but after completion its about 500 MB ( Mine is )