Okay, so I followed all the steps and had this thing running beautifully, however I unplugged it to move it into its final location and plugged it back in (total of maybe 3 minutes) and now it only has telnet access. The HDD isn't mounted, etc. etc. I'm afraid to run the root2x.sh script again because I dont know if I will lose all of the work I've done so far. I tried manually mounting the hdd, and setting the nvram as follows:
nvram set boot_dev = "/dev/ide/host0/bus0/target0/lun0/part1"
(I'm running off the HDD) however after rebooting (by issuing the reboot command from telnet) I'm back to an unmounted HDD and nothing more than telnet access. What do I need to do to restore functionality?
I have same problem.
5 min absence of current is OK
20 min absence of current is OK
for more than 60 min absence of current is problem..
Openwrt or Custom Firmware on asus?
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Is it possible with this firmware to set the CPU to 300Mhz ?
The trick which used to work on the "modified original fimware" didn't seems to works here ???