êàê ïðàâèëüíî "ðàçâèëàíèòü" Wl-500w?

**megagrizly** · 17-11-2008, 10:49

WL-500W. Есть два провайдера, один основной, другой запасной, надо два ван и переключение с одного на другой.

по дефолту все выглядит так:

Code:

[admin@WL-0022151A4268 root]$ robocfg show
Switch: enabled
Port 0:  DOWN enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 1: 100FD enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 2:  DOWN enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 3:  DOWN enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 4:  DOWN enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 5: 100FD enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
VLANs: BCM5325/535x disabled mac_check mac_hash

[admin@WL-0022151A4268 root]$ ifconfig -a
br0       Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1058 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1717 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:127056 (124.0 KiB)  TX bytes:1154112 (1.1 MiB)

eth0      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1057 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1970 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:146248 (142.8 KiB)  TX bytes:1169170 (1.1 MiB)
          Interrupt:4 Base address:0x1000

eth1      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet addr:172.19.224.131  Bcast:172.19.255.255  Mask:255.255.0.0
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3218 errors:0 dropped:0 overruns:0 frame:0
          TX packets:490 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:641992 (626.9 KiB)  TX bytes:93228 (91.0 KiB)
          Interrupt:5 Base address:0x2000

eth2      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:13374
          TX packets:579 errors:836 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:138928 (135.6 KiB)
          Interrupt:12 Base address:0x4000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:549 errors:0 dropped:0 overruns:0 frame:0
          TX packets:549 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:47279 (46.1 KiB)  TX bytes:47279 (46.1 KiB)

sit0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
-00
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

по умолчанию запущены все интерфейсы кроме sit0

Как делал: скопировал содержимое asus-multi-wan.tar.gz http://wl500g.info/attachment.php?at...2&d=1206771540 в /usr/local/sbin

далее сделал:
robocfg vlan 2 ports "1 5t" vlan 0 ports "2 3 4 5t"
vconfig add eth0 2

и появился новый интерфейс eth0.2:

Code:

[admin@WL-0022151A4268 root]$ robocfg show
Switch: enabled
Port 0:  DOWN enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
Port 1: 100FD enabled stp: none vlan: 2 mac: 00:00:00:00:00:00
Port 2:  DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 3:  DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 4:  DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 5: 100FD enabled stp: none vlan: 1 mac: 00:00:00:00:00:00
VLANs: BCM5325/535x disabled mac_check mac_hash
 0: vlan0: 2 3 4 5t
 2: vlan2: 1 5t

[admin@WL-0022151A4268 root]$ ifconfig -a
br0       Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1142 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1851 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:134242 (131.0 KiB)  TX bytes:1189587 (1.1 MiB)

eth0      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1139 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2173 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:154576 (150.9 KiB)  TX bytes:1209027 (1.1 MiB)
          Interrupt:4 Base address:0x1000

eth0.2    Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth1      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet addr:172.19.224.131  Bcast:172.19.255.255  Mask:255.255.0.0
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3916 errors:0 dropped:0 overruns:0 frame:0
          TX packets:537 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:706683 (690.1 KiB)  TX bytes:99615 (97.2 KiB)
          Interrupt:5 Base address:0x2000

eth2      Link encap:Ethernet  HWaddr 00:22:15:1A:42:68
          inet6 addr: fe80::222:15ff:fe1a:4268/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:14060
          TX packets:718 errors:836 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:342 (342.0 B)  TX bytes:171005 (166.9 KiB)
          Interrupt:12 Base address:0x4000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:709 errors:0 dropped:0 overruns:0 frame:0
          TX packets:709 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:61053 (59.6 KiB)  TX bytes:61053 (59.6 KiB)

sit0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
-00
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

- Этот интерфейс это и есть второй wan?
- И если так, то какой из ланов превратился в wan?
- И как сохранить эту конфигурацию, что бы она не схелась при ребуте?

- Можно ли сделать нормальные имена интерфейсов, типа:
WAN - eth0
LAN1 - eth1
LAN2 - eth2
LAN3 - eth3
LAN4 - eth4

безо всяких странных sit или br...

Thread: êàê ïðàâèëüíî "ðàçâèëàíèòü" Wl-500w?

Thread Tools

Rate This Thread

Display

Threaded View

И снова два WAN

Similar Threads

Ïåðåçàãðóçêà è âûêëþ÷åíèå ðîóòåðà ïîñëå ïðîøèâêè

Êàê âñå òàêè ïðàâèëüíî ïðîøèâàòü ìàðø ïðîøèâêîé îò Îëåãà?

Tags for this Thread

Posting Permissions