Ich habe nun auch Samba nah der Anleitung installiert. Doch auch das funktioniert nicht. weiß jemand woran das liegen kann?
Hier ein ps afx;
Code:
[robert@router root]$ ps afx
PID TTY STAT TIME COMMAND
1 ? S 0:01 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
59 ? S 0:00 telnetd
225 pts/0 Ss 0:00 \_ -sh
228 pts/0 R+ 0:00 \_ ps afx
64 ? S 0:08 httpd vlan1
71 ? S 0:00 klogd
72 ? S 0:00 dnsmasq
73 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
74 ? S 0:00 [khubd]
82 ? Ss 0:00 lpd
84 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
88 ? Ss 0:00 waveservermain
90 ? Ss 0:00 rcamdmain
97 ? Ss 0:00 pppd file /tmp/ppp/options.wan0
99 ? Ss 0:00 infosvr br0
100 ? Ss 0:00 watchdog
101 ? Ss 0:00 \_ ntp
110 ? S 0:00 dropbear
127 ? S 0:00 [usb-storage-0]
128 ? S 0:00 [scsi_eh_0]
133 ? S 0:00 [kjournald]
139 ? S 0:00 [kjournald]
190 ? S 0:00 upnp -D -L br0 -W ppp0
Transmission Config File:
Code:
# Configuration
# NOTE: no spaces around the = sign
# the config will be sourced (eg. . transmission.conf)
SOURCE=/tmp/hdd/torrent/source
WORK=/tmp/hdd/torrent/work
TARGET=/tmp/hdd/Torrent/target
#MAILFROM=torrent@somedomain.com
MAILOPT="-smail.somedomain.com -f"
USER=admin
GROUP=root
DATE_FORMAT="%d %h %H:%M"
# Transmission daemon variables
PIDFILE=/opt/var/run/transmission.pid
ACTIVE=/tmp/hdd/torrent/active-torrents.txt
HOME=/tmp/hdd/torrent
WATCHDOG=300
LISTENING_PORT=65534
# set SPEED in kB/s or -1 for unlimited
UPLOAD_SPEED=-1
DOWNLOAD_SPEED=-1
#UPLOAD_SPEED=41
#DOWNLOAD_SPEED=180
# change SYSLOG from /tmp/syslog.log to
SYSLOG=/opt/var/log/messages
#Uncomment the following for UPNP NAT traversal
#NAT_TRAVERSAL=--nat-traversal
# Seed torrent after completition (YES or NO)
AUTOSEED="YES"
# If the following limit is reached watchdog will not enqueue new one
MAX_ACTIVE_TORRENTS=10
# Creating graphical log of transfer with gnuplot
# can be very site specific issue. See transmission.cgi
# how this variables are used.
GNUPLOT=/opt/bin/gnuplot
GNUPLOT_COMMAND=${WORK}/transfer.gnuplot
GNUPLOT_DATA=${WORK}/transfer.data
GNUPLOT_OUTPUT=/opt/share/www/transfer.png
HTTP_IMG_LOCATION=../transfer.png
#TZ offset in seconds. Use +- sign. DST manually
TIMEZONE_OFFSET=+3600
#Colors for command line. # comment out if not needed
GREEN="\033[32;1m"
#NC="\033[0m"
#BACK_UP="\033[1K\033[0G"
NORMAL="\033[0m"
WARN="\033[33;1m"
BAD="\033[31;1m"
BOLD="\033[1m"
GOOD="\033[32;1m"
Das Samba Config File:
Code:
service swat
{
port = 901
socket_type = stream
wait = no
only_from = localhost 192.168.1.1/24
user = admin
server = /opt/sbin/swat
log_on_failure += USERID
disable = No
}
Ich hoffe es kann mir helfen.
Danke im Voraus
Gruß Robert