Results 1 to 15 of 18

Thread: Use Torrential as web interface for Enhanced-Ctorrent:)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Use Torrential as web interface for Enhanced-Ctorrent:)

    Found this interesting web interface for enhanced-ctorrent which enables you to manage your Bittorrent downloads.

    Torrential uses Appweb as a webserver and needs enhanced c-torrent latest version dnh3.1-9.

    1st install Enhanced c-torrent:
    ipk-opt update
    ipkg-opt install enhanced-ctorrent

    2nd install Appweb
    ipkg-opt install appweb
    Run appweb: /opt/etc/init.d/S81appweb
    reboot

    3rd download torrential.zip on link: http://oz4.org/wp-content/uploads/20...torrential.zip
    Then unzip file with Winzip or Winrar and put the extracted files in the Appweb web folder /opt/var/appWeb/web/torrential through WINSCP or FTP whatever you prefer. After this use command: chmod 777 /opt/var/appWeb/web/torrential to enable the application to open the subdirectory.

    Now you can configure Torrential by changing the inc_config.php in directory /opt/var/appWeb/web/torrential. Do this with vi or nano editor. If everything works OK you can also do it through the web interface http://ASUSWL700GE-ip:7777/torrential/index.php.

    Most important are the login, password and directories where to put the torrent files and access the enhanced-ctorrent client. Make sure that the directories are accessible by everyone with chmod 777 /directory/subdirectory/

    Finally reboot and start downloading!

    The Torrential webinterface is accessible through your browser. I found out that Firefox works better than IE 7. If somehow your browser cannot access it might help to clear cache through internet options.

    url: http://ASUSWL700GE-ip:7777/torrential/index.php

    Source: http://oz4.org/29/coming-soon-torrential/
    Attached Images Attached Images  
    Attached Files Attached Files

  2. #2
    It looks good, but didn't you notice some problems with enhanced torrent dnh3.1-9? Because i have tried few new versions of enhanced-ctorrent few days ago but without success - using of all ones ended with "segmentation fault". Only dnh2-3 works good for me.

  3. #3

    Hey

    Hey thanks for this ! it worked great for me, but as soon as i close my Telnet session the web stops working for me ??? any clues??

  4. #4
    @esbe

    you have to install man and man-pages. then i think it should work.

    grat182

  5. #5
    do you have installed also another package that it work? because it won't work for me. thanks

    grat182

  6. #6
    Be sure you end your download path with a "/".

    That made it work for me.

    Sollie.

  7. #7
    Quote Originally Posted by Fullback View Post
    Hey thanks for this ! it worked great for me, but as soon as i close my Telnet session the web stops working for me ??? any clues??
    Hi, first of all thanks for the great idea, it works great after a little working. The Enhanced-Ctorrent 3.2.9 or 3.1.9 (i don't know, the latest in the packages) works fine, with the maximum bandwith in up/download. I buyed this box only for the torrent downloading, and this is the simplest and the first of fully working thing for this function i read in the last one year, so i'm starting to like this box after one year sucking

    Fullback: in the first run, when i closed the telnet session the web interface closed me too, but after a little searching on the appWeb site, i found the right solution. If you install the "screen", you can start the appweb in the second session. After you can detach that screen session and exit from the telnet window, the web interface is still working fine. If you want to, you can write the whole procedure into the rc.local file.

    so, good luck!

    Kopaxi
    Last edited by Kopaxi; 02-09-2007 at 19:35.

  8. #8
    just add the start rule to rc.local and you are done.

    Sollie.

  9. #9

    Hey

    Hey Thank you all for the Help.... I made a big mistake though In my rc.local file i tired to add appWeb at start up, and i messed up writing the code, now i can't telnet into the router to change my rc.local file ....
    Here is what i wrote ******Hey i tired to add my own function in the rc.local file
    fi [-x /opt/etc/init.d/S8appWeb]; then
    /opt/etc/init.d/S8appWeb
    if
    ********
    now i am end up with
    i get
    ""telnet> open
    (to) 192.168.1.1
    Trying 192.168.1.1...
    telnet: Unable to connect to remote host: Connection refused
    """ Thank you!!!
    Edit/Delete Message
    ********** THANK you guys for any help!!! thanks for the reply.
    Thank you all for the reply. p.s I should have thought of the screen idea.... Stupid me. haha thank you aging
    ****************************************I FIXED THE PROBLEM 2 DAY'S OF HARD WORKING AND I FIXED IT HAHA THANK YOU ALL AGING!
    Last edited by Fullback; 02-09-2007 at 23:01. Reason: FIXED!!!

Similar Threads

  1. Изменения в веб-интерфейсе - Custom Web Interface?
    By khorus in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 112
    Last Post: 07-07-2012, 00:32
  2. Web interface
    By Alanjan in forum Dutch Discussion - Nederlands
    Replies: 0
    Last Post: 21-12-2005, 12:41
  3. Replies: 0
    Last Post: 05-05-2005, 21:20
  4. web interface loads only occasionally during boot
    By oferlaor in forum WL-500g Q&A
    Replies: 5
    Last Post: 18-10-2004, 11:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •