Been happily using Olegs firmware for months now (recently upgraded from 1.9.2.7-rtn-r2274 to 1.9.2.7-rtn-r2775), following this tutorial to the letter on my RT-N16. However, it nows seems I've developed an issue I can't solve.
The transmission-daemon (2.22) process randomly stops. Restarting the transmission-daemon or rebooting within Putty starts the process again, but it will stop some time later (within the hour). Restarting the router also starts the process again but not for long.
I've completed a full re-install of the oleg firmware which didn't help.
Re-formatted the /opt partition and completed the configuration steps in this tutorial again which also didn't help. I'm at a loss.
When the transmission-daemon is working I have the following processes running
PHP Code:
[admin@Router root]$ ps axf
PID TTY STAT TIME COMMAND
2 ? S< 0:00 [kthreadd]
4 ? S< 0:00 \_ [events/0]
5 ? S< 0:00 \_ [khelper]
3 ? S< 0:00 \_ [ksoftirqd/0]
24 ? S< 0:00 \_ [kblockd/0]
51 ? S 0:00 \_ [pdflush]
52 ? S< 0:00 \_ [kswapd0]
53 ? S< 0:00 \_ [aio/0]
50 ? S 0:00 \_ [pdflush]
102 ? S< 0:01 \_ [mtdblockd]
231 ? S< 0:00 \_ [khubd]
296 ? S< 0:00 \_ [scsi_eh_0]
297 ? S< 0:00 \_ [usb-storage]
302 ? S< 0:00 \_ [usb-storage]
301 ? S< 0:00 \_ [scsi_eh_1]
439 ? S< 0:00 \_ [kjournald]
440 ? S< 0:00 \_ [kjournald]
441 ? S< 0:00 \_ [kjournald]
1 ttyS0 Ss+ 0:00 /sbin/init
197 ? Ss 0:00 klogd
199 ? S 0:00 eapd
202 ? S 0:00 nas
207 ? Ss 0:00 telnetd
210 ? S 0:00 dropbear -p 8119 -4
486 ? Ss 0:02 \_ dropbear -p 8119 -4
487 pts/0 Ss 0:00 \_ -sh
489 pts/0 R+ 0:00 \_ ps axf
213 ? S 0:00 httpd vlan2
218 ? S 0:00 dnsmasq
244 ? S 0:00 lld2d br0 eth1
393 ? Ss 0:00 /sbin/udhcpc -i vlan2 -p /var/run/udhcpc0.pid -b -O routes -O staticroutes -O msstaticroutes
395 ? S 0:00 pppd file /tmp/ppp/options.wan0
396 ? Ss 0:00 watchdog
423 ? S 0:00 upnp -D -L br0 -W ppp0
444 ? Ss 0:00 /usr/sbin/vsftpd
446 ? Ss 0:00 /usr/sbin/nmbd -D
448 ? Ss 0:00 /usr/sbin/smbd -D
464 ? Ss 0:00 /sbin/syslogd -m 0 -O /opt/var/log/syslog.log -S -l 7 -s 0
469 ? Ss 0:00 /opt/sbin/cron
475 ? SN 0:00 /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
476 ? SN 0:00 \_ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
477 ? RN 0:44 \_ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
478 ? RN 0:01 \_ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
479 ? SN 0:00 \_ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
480 ? RN 0:42 \_ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config
When the transmission-daemon is not working the following processes are running.
PHP Code:
[admin@Router root]$ ps axf
PID TTY STAT TIME COMMAND
2 ? S< 0:00 [kthreadd]
4 ? S< 0:00 \_ [events/0]
5 ? S< 0:00 \_ [khelper]
3 ? S< 0:00 \_ [ksoftirqd/0]
24 ? S< 0:00 \_ [kblockd/0]
53 ? S< 0:00 \_ [aio/0]
51 ? S 0:00 \_ [pdflush]
52 ? S< 0:05 \_ [kswapd0]
50 ? S 0:00 \_ [pdflush]
102 ? S< 0:02 \_ [mtdblockd]
231 ? S< 0:00 \_ [khubd]
296 ? S< 0:00 \_ [scsi_eh_0]
297 ? S< 0:00 \_ [usb-storage]
302 ? S< 0:00 \_ [usb-storage]
301 ? S< 0:00 \_ [scsi_eh_1]
439 ? S< 0:00 \_ [kjournald]
440 ? S< 0:00 \_ [kjournald]
441 ? S< 0:00 \_ [kjournald]
1 ttyS0 Ss+ 0:00 /sbin/init
197 ? Ss 0:00 klogd
199 ? S 0:00 eapd
202 ? S 0:00 nas
207 ? Ss 0:00 telnetd
210 ? S 0:00 dropbear -p 8119 -4
522 ? Ss 0:02 \_ dropbear -p 8119 -4
523 pts/0 Ss 0:00 \_ -sh
524 pts/0 R+ 0:00 \_ ps axf
213 ? S 0:00 httpd vlan2
218 ? S 0:00 dnsmasq
244 ? S 0:00 lld2d br0 eth1
393 ? Ss 0:00 /sbin/udhcpc -i vlan2 -p /var/run/udhcpc0.pid -b -O routes -O staticroutes -O msstaticroutes
395 ? S 0:00 pppd file /tmp/ppp/options.wan0
396 ? Ss 0:00 watchdog
423 ? S 0:00 upnp -D -L br0 -W ppp0
444 ? Ss 0:00 /usr/sbin/vsftpd
446 ? Ss 0:00 /usr/sbin/nmbd -D
448 ? Ss 0:00 /usr/sbin/smbd -D
464 ? Ss 0:00 /sbin/syslogd -m 0 -O /opt/var/log/syslog.log -S -l 7 -s 0
469 ? Ss 0:00 /opt/sbin/cron
When restarting transmission-daemon within Putty I get the following from the System Log on the router
PHP Code:
Apr 28 20:05:55 rc.unslung: stop service /opt/etc/init.d/S90transmission-daemon
Apr 28 20:05:55 rc.unslung: stop service /opt/etc/init.d/S10cron
Apr 28 20:05:55 rc.unslung: stop service /opt/etc/init.d/S05syslogd
Apr 28 20:05:55 syslogd exiting
Jan 1 11:00:04 syslogd started: BusyBox v1.18.3
It almost gives you the impression that transmission is still running when doing the restart
When restarting the transmission-daemon within Putty I get the following from the System Log on the router
PHP Code:
Apr 28 20:31:30 transmission-daemon[541]: Blocklist "level1.bin" updated with 220131 entries (blocklist.c:421)
Apr 28 20:31:30 transmission-daemon[541]: Blocklist "level1.bin" contains 220131 entries (blocklist.c:114)
Apr 28 20:31:30 transmission-daemon[541]: Transmission 2.22 (12099) started (session.c:708)
Apr 28 20:31:30 transmission-daemon[541]: RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:807)
Apr 28 20:31:30 transmission-daemon[541]: RPC Server Adding address to whitelist: 192.168.1.* (rpc-server.c:807)
Apr 28 20:31:30 transmission-daemon[541]: RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:985)
Apr 28 20:31:30 transmission-daemon[541]: RPC Server Whitelist enabled (rpc-server.c:989)
Apr 28 20:31:30 transmission-daemon[541]: Port Forwarding Stopped (port-forwarding.c:183)
Apr 28 20:31:30 transmission-daemon[541]: DHT Generating new id (tr-dht.c:306)
Apr 28 20:31:30 transmission-daemon[541]: Using settings from "/tmp/harddisk/transmission/config" (daemon.c:498)
Apr 28 20:31:30 transmission-daemon[541]: Saved "/tmp/mnt/disca_3/transmission/config/settings.json" (bencode.c:1716)
Apr 28 20:31:30 transmission-daemon[541]: Blocklist "level1.bin" contains 220131 entries (blocklist.c:114)
I fear my limited knowledge is preventing me from getting to the bottom of this one and therefore request help. If there are other outputs you wish to see let me know and I'll provide. Thanks in advance for any assistance you can provide.
Forum Guru
Originally Posted by reiten
Posting Permissions
