Yes yes, maar welke opties naast Virtual Server biedt de router om poorten te forwarden? Ga je dan eigenhandig de IPtables aanpassen?
Type: Posts; User: Jethro
Yes yes, maar welke opties naast Virtual Server biedt de router om poorten te forwarden? Ga je dan eigenhandig de IPtables aanpassen?
Hoe doe je dat NAPT instellingen aanpassen?
Would this also work to setup a permanent VPN connection to my work?
In order to use Outlook at home, the VPN connection is needed. Also, one of our customers only gives access to their LAN to a...
Ik weet niet welke firmware versie je gebruikt, maar met mijn niet werkende webcams zie ik, als ik via de webinterface onder system log kijk, een line tegen waarin iets staat als:
USB device 3...
Thank you, I really appreciate the effort you put into this. I guess that OpenWRT is a bridge too far as far as my knowledge is concerned. I am still hoping for a simpler solution actually... :(
Tyring to get this under the attention of somebody who knows how to handle this problem.... :rolleyes:
Both PPTP as well as L2TP IPSec... but i normally take the PPTP.
Although you are right, that was what I said in my start post. The problem is that there are more computers on the LAN that need the same connection. Therefore, yours is not the best solution for my...
As far as I know, the available packages are only concerned with turning the WL500gx into a VPN server, which is clearly not what I would like to do. And second, I don't think the WL500gx just runs...
I wouldn't know where to start making this VPN connection manually. :confused:
I know that one of the options during setup is using PPTP to "dial-in" to your ISP, but that is not the option I'm...
I believe there are people on this forum who actually know how to solve my problem, but havent' spotted this topic yet... :(
Yes, you are right. I should have mentioned that the routing part is not the biggest problem (and I think I know how to do that), but it is using the WL500Gx as a VPN client. Lots of stuff here on...
Look three posts up. Similar problems. :(
I would like to make a connection to my work place, next to the "normal" home internet connection. This technique is known as "split tunneling". If you were to attempt this using a Windows XP...
Kijk hier maar eens naar:
http://www.macsat.com/macsat/content/category/3/13/29/
I have a very similar problem. My Wl500gx runs in gateway mode and is connected to an ethernet DSL modem. Recently I upgraded the Oleg firmware from 6b to 7b. I cannot exactly pinpoint the problem,...
Het is natuurlijk vanzelfsprekend dat je niet tot in de eeuwigheid bandbreedte kunt claimen zonder dat andere acties op het netwerk daarvan last ondervinden. Ik zou eens proberen om de maximale...
Logische vraag is: welke firmware gebruik je?
Oleg's laatste firmware schijnt problemen met de ip stack tabel op te lossen:
Misschien zou je dat eens kunnen proberen. Bij mij werkt het in...
Probeer eens via de webinterface, onder Wireless eens de volgende settings:
Channel: Auto
Wireless Mode: Auto
Als dat niet lukt, zou ik aanraden het channel handmatig in te stellen en dan op...
Nee
Groeten, Marcel...
Ik las op een forum over gaming dat het instellen van de verbinding op 11 Mbit (ook al kunnen je spullen 54 Mbit aan) de problemen nog wel eens op kan lossen. Misschien een poging waard...
Ik haal max 2,3 MByte/sec, maar ik weet niet of dat de limiet van de hardware of de lijn is.
Wat heb je naast je PC nog meer aangesloten? USB apparaten toevallig?
No idea why it does that, but the last time I had such a problem I pressed the reset button for 8 seconds, restored the default settings, installed the latest firmware and then it all worked fine......
You could always try to upgrade to the latest firmware (recommended).
What client OS do you use? Windows?