What would be the best way to limit 1 internal IP but keep the speed for the internal net?
# 192.168.0.9 should get an up/down like 10k/50k to the external net
# internal net - 192.168.0.x...
Type: Posts; User: majx
What would be the best way to limit 1 internal IP but keep the speed for the internal net?
# 192.168.0.9 should get an up/down like 10k/50k to the external net
# internal net - 192.168.0.x...
120=2 min and not 2h :rolleyes:
...then just change your WAN to fixed IP (for testing)
if it works the next 3 minutes without big logs keep it and ask the isp (see before) i would say..
Power LED should light steady...not blinking...
->PWR flashing every 10-15 sec...I think your box is rebooting all the time. Try reflashing or search the forum for the "clear-nvram" image to reset...
Well, the lease time is obtained from the ISP's DHCP.
barsju:
But having 2h lease is a bit :confused: -> having 4 months the same IP...
Maybe you contact your ISP and ask him to change to a...
What about setting your WAN to fixed IP in that case?
But before that ask your ISP if he is able to tell you your IP in case the "lease" will change (some aren't...)
no linux?
try knoppix -> www.knoppix.com
it's a live cd...no install needed
vmware-> you can get a 30d trial if you register
sorry, was just an overview...did't read is fully
will edit it!
because of dropping...what model of speedtouch do you use?
Maybe you change the settings of your ST to dial and not your asus?
kpn is big enough, call support if they can help you to change your...
iptables -t nat -I PREROUTING -p 47 -i eth1 -j DNAT --to-destination 192.168.1.2
iptables -t nat -I PREROUTING -p tcp -i eth1 --dport 1723 -j DNAT --to-destination 192.168.1.2:1723
iptables -t...
Talking about the 500g:
in my case eth0 is wired LAN, eth1 is the WAN, and eth2 is wireless
br0 is a bridge between eth0 and eth2
But in general it's a linux ;)
in this case with existing boot-line-up ->
bootloader starts kernel & init (and rc-scripts) witch are all hardcoded as c-src. changing that srs-es to disable all...
Do you mean, turning on the box -> you have at least eth0-2?
And an unconfigured WAN-IF and br0 (until config read from nvram)?
Flashing FW with a recompiled one...do you recompile/flash that...
Did you add your IP's DNS to your clients config (don't obtain them via DHCP from router!)
do you mean this one?ebay-login
I'm working for an Austrian ISP and we had several probs with mtu
-> but rather on sending data than on receiving.
-> IE works fine, mail receive also
-> sending small mails without attachments...
Did you enable "ftp-server" ?
had a similar prob caused by a disabled one.
enabled it, rebooted and it worked
try it there: asus Homepage, direkt link to WL500g
go to "All" - there you will find it.
I already mentioned it...it would be good to look for existing config-files and use them if there (forum-link:harcoded-config )
But I'm not a programmer, just started to understand:o c - so i can...
Imagine the following:
You have unpacked your WL and applied your custom Firmware without making any configurations (over the web-interface)
or you have reset and applied your default config with...
I'm not an expert on programing, but I prepare some lines for the firewall_ex.c:
I want to add lines which make the default-police to drop (something like a patch?)
These lines will be commented...
To get an IP on the WAN (added interface name, we won't get an IP on internal net)you have also to send out an UDP, to be "faster" place it before DHCP-Reply
somewhere at lines 95-108
95 ---...
what do you mean by poor?
maybe you create some rules within your iptables?
listen local to a specified port and pointing your RANGE to your PORT?
X)
150k "RAM" - and the rest? why don't you try to recompile your src to get less?
XX)i would even think of:
every alert mail is getting encrypted for a special recipient by gnupg.
You...
leave asus-guys working...they create their firmware for end-users.
It think it's better to patch their sources to remove uneeded tools to be able to add more needed ones.
(btw, why are iptables...