gewoon nfs gebruiken dus, met automounter werkt dat altijd soepeler
Type: Posts; User: jaapjeuk
gewoon nfs gebruiken dus, met automounter werkt dat altijd soepeler
try ping 192.168.1.1
what's the result of your pc's windows-command: ipconfig /all ?
explanation:
http://wiki.openwrt.org/OpenWrtDocs/nas
you did a good job, eric! but how you knew how to reset the memory?
i had the same problem in the past, was solved in this way:
1) install windows/rescue.exe (from the asus wl-500g utils-cd)
2) put the wl500g in upgrade mode
3) flash first (using rescue.exe)...
thanks a lot for your answer MAX2950.
the fact that your quasi wds connection works is quite logical: you do have a wired connection from a pc to your wireless 2nd router, your 2nd router is...
just flash a nvram-clear.trx , that should be enough to recover
of gewoon de subnet masks wijzigen naar 255.255.0.0
cdisk and sfdisk must be run as root user, no problem for now
the file-system is rewritable, thats OK, you are able to rewrite that file bye means of vi
chmod 777 /opt/etc/ushare.conf is not...
try:
who
whoami
uname -a
then
su -
<enter root pwd>
ls -lap /opt/etc/ushare.conf
chmod 777 /opt/etc/ushare.conf
retry vi ..
if, not show results of:
mount
cat /etc/mtab
df
cat /etc/fstab
first reflash with wl500g-clean-nvram.trx to reset settings
afterwards reflash the latest firmware:
http://website.wl500g.info/beta/wizard.php
note:
http://wl500g.info/showthread.php?t=1606
just use your asus-webinterface instead of modifying your post-firewall
take a look at:
http://www.portforward.com/cports.htm
http://portforward.com/english/routers/port_forwarding/Asus/WL-500G/...
$ wl status
SSID: "OpenWrt"
Mode: Managed RSSI: -49 dBm noise: -94 dBm Channel: 5
BSSID: 00:11:D8:43:80:B2 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b)...
your mini-howto is working perfectly, thxs a lot.:):D
i tested a wireLESS connection from my laptop to the second wl-500g/AP in "Ethernet-Bridged Mode" as described in your great mini-howto, but...
i have also two asus wl-500g 's ,
both have the same firmware: 1.9.2.7-7g
everything is working fine, accept:
WDS + WPA-TKIP + AES doesn't work and
WDS + WPA + AES isn't working...
de default uitgeleverde asus wl-xxx routerfirmware werkt uit-de-kunst en is louter bedoeld voor linux-dummies, cq windhoos-klikkers.
wil je die box serieus inzetten en benutten, dan ontkom je er ...
a (u)DHCPC (client!!!) daemon/program must run at your router.
the obtained dynamic ip and leasetime is defined by your ISP's DHCP-SERVER, when the end-of that specific lease has been reached, than...
ik heb in het verleden te veel tijd verspild aan stupidftp, alleenmaar allerlei gezeik en beperkingen, 'k doe nu al jaren gewoon vsftpd net als op m'n gewone linux-boxen, da's even prutsen met de...
ik doe zulke dingen aan het eind in de post-mount, da's dus na uitvoeren van post-boot en post-firewall
Just force to get a new ip this way:
udhcpc -q -i eth1 -s /bin/true
vind ik nogal risicovol, je user+wachtwoord gaan dan onversleuteld over het internet, veel veliger is gebruik maken van ssh-port-forwarding (dropbear of openssh), je webserver (poort 80 of een...
start web-interface van je router ; Internet Firewall - Basic Config ;
zet optie "Enable Firewall?" op ON
zet optie "Enable Web Access from WAN?" op OFF
installeren van de busybox m.b.v. ipkg (zie hiervoor verder in het forum en
# ASUS WL-Series ipkg package system Tutorial , http://www.macsat.com/ipkg.php )
ipkg install busybox
Installing...
op je WL-500g[x] router, docu:
http://wl500g.info/showthread.php?t=1058&highlight=post-boot+.files
vanuit de cron, docu:
http://www.macsat.com/macsat/content/view/28/29/#conf
docu van udhcp[c]:...