You are right. I can compile the FW for testing.
Also find this:
http://www.howtofixcomputers.com/forums/storage/usb-1-2-device-descriptor-read-64-error-71-a-20161.html
with this bug...
Type: Posts; User: s1za
You are right. I can compile the FW for testing.
Also find this:
http://www.howtofixcomputers.com/forums/storage/usb-1-2-device-descriptor-read-64-error-71-a-20161.html
with this bug...
tried tomato with same result :(
nevertheless found this page in Portuguese/Brazilian :D
http://www.anselmolsm.org/blog/coolermaster-x-craft-linux/
translated by google to english...
I'm trying to find a solution by excluding all the variables and it's not from disks itself but maybe from the combination of this disks with this firmware (even though I had similar results with 2.5...
1. The Iomega 1Tb are external 3.5 disks and have a external power suply;
2. Everything worked for 2 years on a asus 500gp without any problems;
3. The drives work perfectly (same power suply and...
Sda = 1Gb Flash Pen (Swap at sda1 and /opt at sda2)
Sdb = Sdb1 ext3 formated Iomega 1Tb disk
The sdb stops working after some reads and writes (see syslog.log file attached on previous post)
...
Hi,
Following this posts http://wl500g.info/showpost.php?p=193019&postcount=86
today I've re-formated everything (pen with /opt and the 1 Tb hard disk), installed from scratch with r1807 (no...
2nd test
with 2 hdd discs on a hub connected to the 2nd usb port (1st with a pen /opt) (still on R1478 I'll continue testing on new releases)
mount the RAID /dev/md0 ok, start to sync at about...
1st test with R1481 was:
:) OK. Managed to copy a 2Gb file without any errors...
I'll continue the tests (hub, RAID, etc.)
Nevertheless I'd like to thank Ily (and also all the others) for the...
Tried
rmmod ehci_hcd
insmod ehci-hcd log2_irq_thresh=4 (from 6 to 1)
with no luck on both RT-N16 R1456 and the latest R1478 :(
removing the ehci_hcd and mounting the drives on ohci_hcd...
Asus RT-N16. (Sorry, was on previous posts)
I also tried:
echo 120 > /sys/block/sda/queue/max_sectors_kb
as on https://help.ubuntu.com/community/Mount/USB
with 120, 128 and 64 with no luck....
So, after testing everything (installed everything from scratch FW R1456, tested step by step and using different disks) I noted this facts :confused:
-Tested with 3 different types of usb pens:...
Now the drive (Iomega 1Tb) is connected directly to the usb port, since I got a similar problem using both drives (I've got two) in raid1 (post #77).
Trouble started with RT-N16. I had this system...
Hi,
Things got worst :(
Now with only one drive connected directly to the usb (no raid) I've got the writing errors to the drive (read seems ok since it was mounted for 2 days and I've got no...
Ubuntu 9.10 runs on the latest kernel (for this version) 2.6.30 if I'm not mistaken (I'm away from the laptop)
I've just used the laptop to check the hardware (disks and hub). Also installed mdadm...
After my last post saying that everything was up and running an error just came out :(
after using the raid (2 1Tb usb disks on a USB Hub that worked flawlessly on the 500gp for 2 years) on the...
I'm compiling it on the router.
hi,
I'm trying to compile the latest version of mdadm (3.1.2) in asus rt-n16 (with the latest firmware from oleg linux 2.6.22.19) but I'm stuck with this error:
error: `O_NOATIME' undeclared...
Thanks.
My main doubt was 'how' different was to compile the firmware (specialy after some misguiding posts)
But after your post I've compiled the firmware and everything is up and running now.
That was also my suspicion...
Should I beg for more clues on how to setup for a correct RT-N16 compilation?
I've read allot of pages with compile info but no specific how-to's
I really...
I've made a VM with Virtualbox with fresh install of Ubuntu basic server and the essential packages.
Used the following steps:
//cd to src
cd /usr/src
//get the kernel
sudo wget...
I'm upgrading everything to RT-N16. Installed everything on the r1322 apart from the kernel modules:
I've compiled the md.ko and raid1.ko kernel modules but I cannot load them with insmod. I get...
@wpte
Thanks a lot for your reply.
I have a few questions regarding which option should I follow:
1. compile the firmware
In here should I use the GPL_1927.zip sources (as stated in...
Hi,
I've been using a self-compiled version of Oleg 1.9.2.7-10 (2008-03-30) on a 500GP with RAID1 (based on this tread http://wl500g.info/showthread.php?t=15550 comments and modules md.o and...
The problem isn't the RAID software, this works flawlessly.
The problem is that 'scsi-stop' expects a scsi device (/dev/scsi/host0/bus0/target0/lun0/disc) and doesn't accept the 'md0' device (which...
Can someone give me an opinion...
Thank's