Hello
I've bought a WM2005 device and I'm having problems with DHCP. The device associates correctly with my WL500gx, but it can't retrieve a valid IP. In the logs, dnsmasq seems to be receving...
Type: Posts; User: unaiur
Hello
I've bought a WM2005 device and I'm having problems with DHCP. The device associates correctly with my WL500gx, but it can't retrieve a valid IP. In the logs, dnsmasq seems to be receving...
If you run an HTTP server you can disable the connection limit at port tcp/80 with this post-firewall command:
iptables -I SECURITY -p tcp --dport 80 -j RETURN
But I agree, 1 connection per...
I've remade the patch and compressed it as you suggested.
cd broadcom/src
gzcat rc-firewall.diff.gz | patch -p0
The autoconf scripts doesn't like the names of the executables in our toolchain. If you pass --host=mipsel-uclibc to the configure script, it says that uclibc system is unknown. If you pass...
With my patch, you can enable and disable telnetd from the web interface, so that check isn't needed.
You really wish a 8 MB flash chip!
In the Wl500g deluxe, ports are labeled as follows:
0 => WAN
1 => LAN 4
2 => LAN 3
3 => LAN 2
4 => LAN 1
5 => an internal port connecting the switch to the router, and should be connected to...
I've played with several elemental settings (the MAC list, the virtual host lists, incoming forwards). I've posted the patch to let other people to play with it before including it in any firmware.
...
I've rewritten the firewall rule generator. With this patch:
- The rules that protects against DOS attacks no longer allows to forward all incoming connections.
- If you activate MAC filtering,...
This piece of code is designed for an IBM compatible personal computer. The asus router isn't a PC, so the pararell port probably doesn't work like this code expects.
This code doesn't compile:
In file included from /opt/brcm/hndtools-mipsel-uclibc-3.2.3-full/include/linux/sched.h:13,
from...
It seems that gift isn't compiled for Oleg's firmwares.
gift-setup isn't a shell script. It seems a perl script, so you will need to install a perl interpreter. Then, execute this:
chmod...
I'm pretty sure that the firewall FORWARD'ing rules are incorrect. Near top, the rule 4 allows any connection, given that don't exceed the 1/connection per seccond rate:
Chain FORWARD (policy...
I don't miss any function.
Maybe Oleg is a KGB spy (or whatever is called nowadays) :D
Attached a patch against firmware 1.9.2.7-6b that allows to disable telnetd from the "IP Config-> Miscellaneous" administration web page.
By default, is enabled.
Usually, the current directory isn't in the path. You should write:
./gift.sh
or
sh gift.sh
What I would like is to make easier to choose what shell daemons are running.
I'm thinking about lauching dropbear automatically on boot and removing telnetd.
I've already patched rc to launch dropbear and adjust input filtering rules, both controlled by sshd_enabled_x...
3485696 bytes. Nonetheless, there must be small size differences since the firmware embeeds info about the host where was built and timestamps.
I found the answer myself: the firmware can't be compiled on an AMD64 system, a 32 bit operating system should be used. :(
I've just realized that my Asus router isn't protecting my intranet. I've connected my laptop, the wl500g & the cable modem with a hub, so my laptop doesn't belong to the intranet. In the laptop I...
The iptables command works in Oleg's firmwares, that is what I use and works fine. The extra ports shown at the forwarding page can be generated by the "Port Trigger" feature.
Upps... you are right. I learnt that on the Linux 2.0 and ipchain days and never updated my knowledge database. :rolleyes:
Linux is capable to do so. Traffic comming from the wan can be redirected to an internal webserver while traffic from the lan arrives to the administration web page. I don't know if the web...
I'm unable to compile the lastest & greatest Oleg's firmware.
I follow the steps at the Wl500g Wiki: get GPL_1927.zip & wl500g-1.9.2.7-6b.tar.bz2, copy & paste the givin script and run it. It...