I "just" had to power cycle the router, reboot will not do. Then my usb stick got detected automatic.
Type: Posts; User: FIB
I "just" had to power cycle the router, reboot will not do. Then my usb stick got detected automatic.
You need to ask your provider (your company?) for the STUN-server name/IP. Why not try setting up and play with your own private SIP/VoIP account?
I am using both Sipura SAP 2000 (www.sipura.com) and the PC porgram X-Lite (www.xten.com), connected via wl500g, and it works great on Oleg's "standard" software.
I know that some gear only works...
Tested@
Model: WL-500g
Firmware: WL500g-1.9.2.7-5a-pre2.trx
Hardware: 1.0
Device OK:
Brandname: Apacer
Brandtype: Handy Steno HT202
Memory: 1 GB
USB Interface: USB 2.0 highspeed
Works for me. Thanks for your help.
From WL500g-1.9.2.7-5a-pre1.trx no trick.
Yes and yes. At the end I managed to be unable communicate with the router if I attached the WAN cable!?! So I more or less gave up the post-firewall approach. Then I tried the GUI approach.
The trick:
killall p910nd
p910nd -f /dev/usb/lp0 0
do not do any difference on (my ;) ) WL500g-1.9.2.7-5a-pre1.trx.
Sorry, but WL500g-1.9.2.7-5a-pre1.trx do not work for my, but different than WL500g-1.9.2.7-5.trx. Look like some missing/corrupted/extra chars are sent to the printer. I just do the "Print Test...
For me this works only if I disable the firewall and then not all my unused ports are stelth. Anyone with the same problem?
As a workaround for the missing firewall I created this Virtual Server...
According to the Sipura documentation you can limit the number of ports used for RTP. If you limit the used ports I think you will be able to use the simple WEB-interface for the Upload Policy List...
Anyway, thanks for the trick - and firmware.
That makes me able to print again, great. Can I insert the codelines in post-boot to make it a permanent fix for me?
Yes, RAW port 9100
Already done that - no change, sorry.
Hi Guys,
I got trouble with my USB printer. It just print incomplete jobs. No problems on WL500g-1.9.2.7-4.trx.
From the System Log:
Jan 1 01:00:11 kernel: printer.c: usblp0 Device ID...
I used this forum search facility and searched for "*httpd", then I was up and running. Be aware that the information on this subject is not the right place to start creating your first web-server!
...
I use the FTP-client (and soon a web-site) build-in the WL500g, so I perfere the DDNS client in the WL500g.
I will take a look on the /init/ddnsclient - when I get some spare time. I am open for...
Hi,
Thanks for the tip.
Is there a way to automate the updating, this was actual what I mend by “a fix”?
Anyway
Thanks
Hi,
I am using ddns and got the following message from dyndns.org:
A hostname you have registered with Dynamic Network Services at DynDNS.org, X.X.X, with current IP address X.X.X.X, will...
When I enable the Firewall I am not able to make VPN passthrough work. else OK.
I was not able to configure the filter table and port trigger (lack of patience) to make it work, even that I was...
Yes you can, see http://wl500g.info/showthread.php?s=&threadid=44
(Reported Compatible Hardware, USB Memory Stick)
When browsing this forum remember to show "from the beginning"!
Found at http://www.asus.com.tw/support/download/item.aspx?ModelName=WL-100g&Type=Latest
Description
a. The ASUS WL-100g Cardbus Card utility progrm in English.
b. Utility release...
Newer used it my self, but byond the user manual you can find help here : http://www.timhiggins.com/Sections-article50-page1.php
Let us know about your status.
According to Compaq (ftp://ftp.compaq.com/pub/softpaq/sp23001-23500/SP23107.txt) :
ENHANCEMENTS:
- Broadcom 802.11b, 802.11g driver Version 3.40.25.3
- Support for SoftAP in Windows XP
...