Hello,
I use oleg's 1.9.2.7-7g firmware and the updated aiccu without problem.
I follow zkar's howto and it is running. Do not forget to change the prefix length to 64 to enable...
Type: Posts; User: Ark+
Hello,
I use oleg's 1.9.2.7-7g firmware and the updated aiccu without problem.
I follow zkar's howto and it is running. Do not forget to change the prefix length to 64 to enable...
Hello
Thanks for your good work Oleg.
However 1.9.2.7s seems to have the same bug that early 1.9.2.6s : FTP is not working under PPPoE. You called the patch "pppoe/pptp mss clamping".
Here is the full log.
Inserting the command at the top of the stack solves the problem.
Thanks
Release 1.9.2.7CR5a :
[admin@wl-500g root]$ iptables -L FORWARD -vn
Chain FORWARD (policy...
Hello Oleg,
I've noticed the same problem for all your 1.9.2.7 releases :
Sometimes a LIST transfer hangs when the directory's size is greater than the MTU.
I have put a sniffer between the...
You can put your voice traffic in the low delay queue by adding the following lines in the wshaper script
tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \
match ip src...
Chris,
Another idea : may be the deconnection comes from your ISP which has its own idle timer. I suggest you to start a continuous ping from a telnet session.
ping -I 30 -s Remote_IP_address...
Have you seen the changes log for release 1.8.1.7 ?
http://www.asus.com.tw/support/download/selectftp.aspx?l1_id=11&l2_id=2&l3_id=0&m_id=4&f_name=wg01080107_WL500g_EN.zip~zaqwedc
6. Chg: For...
The NTP client pools the server every 24 hours, as shown by chris.
Possibly there is a bug in the idle timer function. However are you sure that you are not disturbed by incoming traffic ? I...
Thorz,
The both scripts will work (except that you have forgotten the dest address parameter in the second one).
Personally, i would use the second one :
since it put azureus in the low...
Good work Styno, but why do you put the port 430 (utmpsd Common service) into the medium queue ?
BTW, i have found that the wshaper script can be used both for input ($DEV=br0) and output...
ISPs do sell an IP bandwidth (at least in France, but i don't think it is different in Europa), and the ATM VC is shapped at 640/160 for an IP bandwidth of 512/128 (20% higher due to ATM overhead)....
Hi,
Asus has posted a new version of "Asus utility". There is no history file in the package, thus i do not know what is new, but it is worth a try.
Dowload knoppix ISO from http://www.knoppix.org, burn a CD with the ISO and boot on this CD. No installation is required. You will find fdisk and mke2fs.
KNOPPIX is a bootable CD with a...
With a standard Unix, the instruction for static arp is :
arp -s 192.168.1.10 01:02:03:04:05:06
Using this instruction, the host will not send an ARP request in order to convert an IP address...
I do not think it can work that way.
I guess that when forwarding the magic packet (NAT), the router does not recognize the forwarding address as a broadcast address (as cisco does) and issues an...
It just mean that your ISP has a good DHCP allocation. The DHCP server resend the same IP address for a given MAC adress (of course if address is still available).
You may try to change the ASUS Mac...
I use a speedtouch modem behind the Wl-500g. The router works fine with it during about one week, then hangs.
Since the upgrade with the firmwares provided by Oleg (thanks again Oleg) it is really...
Are you sure that your Key is recognized by the Asus WL500g ?
If the router has successfully mounted the device, you will see a newly created ftp_pub directory.
You may also use the hacked...
I do not think you have to enable the virtual server. Your router is smart enough to understand that, if you configure the FTP server, you need also to listen the ports 20:21...
Since we now have both ftp to upload files and telnet to control the router, why not install a full development environment on the USB disk ?
We have to install gcc and then use the wl-500g to...
A complete review of the wl-500b written by Evgeniy Zaitsev is available at :
http://www.digit-life.com/articles2/wrls-asus-wl-500b/
It works perfectly (except the fact that the WLAN settings are now set to '1Mb/s to 11Mb/s', but it is still working in 54Mb/s mode).
Looking in the conf files, i have understood how to properly...
Model wl-500g
Firmware 1.6.5.3
Device : Printer
Brand : Brother 1440
http://www.brother.com
http://www.brother.com/europe/printer/info/hl1440/hl1440_ove.html
Works on parallel port only....