1. пробовал и с винтом и без винтов и с другими винтами
2. проверял питание до и после БП до 220, после 12В - все ок
еще есть предложения?
Type: Posts; User: bado
1. пробовал и с винтом и без винтов и с другими винтами
2. проверял питание до и после БП до 220, после 12В - все ок
еще есть предложения?
of course...
Привет!
Уже оставлял сабж на ветке про Wl700(http://wl500g.info/showthread.php?p=83554#post83554), но решил тут повторить, авось тут чего подскажут.
Суть такая, прощивал много и разными...
it's even doesn't ping... it's even doesn't blink power or any other buttons or leds and, of course, TFTP doesn't work too due timeout.
hi! i think i killed it :(
I play with several fws openwrt, Kfuge, original asus.
Then i install my new 500gb hdd and try to install kfuge 1078 fw!
everything was excellent but, when i power off...
so... i tried your advice!!!
i made nvram unset boot_dev' and 'nvram commit'
so i installed the kam 7.09 fw! the first test was hard power off and now i have same problem :( after 6-7 hours wait...
OK! i've done it and it's start to boot, but! with problems :(
The power button light - ok, ready light - ok, and nothing! no ping no something else!
Try your new FW from http://wl700g.homelinux.net/drupal/?q=system/files/kam7.09.trx
after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready...
I can't see the movies :(
But i should to know - it works(boot) without problems or now?
What about problem with boot properly when the power cord has been removed for several hours?
OK! :) i'll try the kfurge FW too!
Great! where are i can get the "nvram-clear.trx" file?
Hi all...
I tried lots of FS (asus 1.4.6/7.8/ 2.0.0.1/ openwrt 7.0.6-7.0.9) but didn't get what i need!!!
So, i need:
1. Internet with PPTP (MY ISP use it :( ) - asus FW ok, openwrt can't...
NOPE, the ready light is on. but when it run normal it goes off.
The problem is like on 7.07 fw from here: http://wl700g.homelinux.net/drupal/?q=node/139
after changing root to hdd my wl-700ge isn't able to boot properly when the power cord has been removed for...
After several iteration i made it live :)
Thanx and thanx and thanx again!!!
i have the internal Formated HD!
the router show me that it is a foreign HD... without any shares
gratitude182 - big thank to you!!!!
realy!!!
After reset button - everything working... all but...
How i can rename Disk name to myvolume1 and make a share myshare1?
So... what i've done...
1. Install OpenWRT FW from here: http://wl700g.homelinux.net/drupal/?q=node/24
2. format HDD from here: http://wl700g.homelinux.net/drupal/?q=node/25
i've done this...
I start to understand what am i doing :)
so! i install the openwrt fw from http://wl700g.homelinux.net/drupal/?q=node/24
Now i have the router with telnet access!
Ok! Now i should format the...
I made that instruction: http://wl700g.homelinux.net/drupal/?q=node/54
* press the ezflash button (keep it pressed) and plug in the power
* If the ready light stops flashing let go of...
Hi all!!!
i tried 3 last firmwares for my WL 700ge. The best looking firmware and most frendly - 2.0.0.7
I couldn't make Download master work fine :(
the second problem is problem with user...