Search:

I have been trying both Oleg firmware and OpenWRT. My main concern was that the Samba version used by Oleg's firmware didn't support large files (>4GB). BTW. the firmware version was 1.9.2.7-5a.
...

I updated my S55freeradius to make the last line look like this:

/opt/sbin/radiusd -s &

On the wl500g you should set the wrt54g as default gateway ;)

Any luck on that? ;)

I have been working on it FreeRADIUS too, but not with much luck.
First, I installed the freeradius ipk and started working on things.

I now came to the point where my...

In /usr/local/sbin/post-boot put the line:
killall dnsmasq

But the dnsmasq program is also functioning as DHCP server, so if you want DHCP, you should find another server for it

But 35 Mbps seems less then 54 Mbps to me...

Is the afterburner of any use?
Since the CPU cannot handle higher traffic...
Or is it just a marketing trick?

Komt er iets uit de printer (maar niet goed)?
Gaat er op de printer een lampje knipperen ofzo?
Verschijnt er op je PC een foutmelding?

Hmm, I was just writing out what happens (Power LED activity and messages that appear in the Status frame of the ASUS tool). And for some reason it now accepts a firmware...

The only thing that's...

When working on some stuff, I just uploaded a new firmware. This failed and the unit didn't want to boot anymore. So I brought it into firmware recovery mode (button-push and power-on).

Now the...

I was studying the firmware upload code (working on Download-and-Upgrade button for webadmin for quick updating) and that seemed to only write to the 'linux' partition.

#define sys_upgrade(image)...

But with WL-500g that can not be solved I guess.

Although I'm just thinking... maybe it is possible (on Deluxe version) to put each port in seperate VLAN. Then some way accept EAPoL packets and...

[admin@WL500g root]$ cat /proc/mtd
dev: size erasesize name
mtd0: 00040000 00010000 "pmon"
mtd1: 003a0000 00010000 "linux"
mtd2: 002f53b4 00010000 "rootfs"
mtd3: 00010000 00002000 "nvram"...

You can manually manipulate the firewall configuration using iptables command. You can add to the MAC-address check, that the IP-address must also match, so this way nobody with MAC and IP that don't...

Patch to the 1.9.2.7-5 tree ;)
Also updated a little wrong thingy in the web-interface menu.

bunzip2 the file and in the src/ directory enter:
patch -Np2 < path/to/cipe.diff

If you're using a good identd on your PC, this shouldn't work :)
Short introduction to the ident protocol:

The protocol allows remote systems to request what user is controlling a certain...

I added CIPE support, because it isn't such a complex application and with some modifications in the Makefile it compiled and run straight away :)

CIPE is nice for static VPN's between subnets,...

Some people contacted me on IRC for questions about WL-500g development. This gave me the idea to start a channel where people could meet each other.

Therefore I invite people to visit #wl500g on...

Interesting to know:

At home I've got one WL-500g (w1) in Home Gateway mode connected to my ADSL modem. Another WL-500g (w2) in Access Point mode is connected to w1. The cable on w1 is on the LAN...

I just created a patch to the 1.9.2.7-4 Oleg firmware for CIPE support. Maybe Oleg is interested in integrating it into his next firmware version?

A couple of customers of the company where I work...

What exactly do you want to route? LAN and WLAN are bridged, so this should work okay. Between WAN and LAN in AP-mode should work to.

In home gateway and router modes, LAN and WAN are seperated....

More information about CIPE can be found at http://sites.inka.de/sites/bigred/devel/cipe.html where you can also find the original source code. A Windows version is also available at...

Leuk :) -- Ik ga meedoen

I'm running a firmware with the patch you sent (to disable WAN port die fix), and my main router is running fine now (home gateway mode).

Now I'm getting interested in the WAN-port die problem,...

Applied Oleg's patch and flashed my WL-500g... Now let's wait for a crash and stream MP3 in the meanwhile :)