I hope this will help you.
I have just fill the instructions to instal the custom firmware by printscreen...
It work fine for me !
Good luck
Printable View
Great job jeromv! Do you have an html version I could use as the basis for updating the extremely bland existing page?
- K.C.
Hi folks,
actullay you can forget about this post - just read it if you're facing the same problem which was solved after downloading the WL700gE_1.0.4.6_kc_02a.nas file again.
I simple can't get WL700gE_1.0.4.6_kc_02a.nas installed.
At the moment I have the original Asus 1.0.4.6 firmware installed on the router and following all the different upgrading FAQ I always get the same error message from the firmware restoration tool :(
It does not want to write the backup on c:\ but tells me it can't write in a temp-directory on my PC - please see attached picture.
Anybody a hint ?
Best regards,
Extreme
P.S.: up- or down-grading the original firmware is no problem.
@ Extreme
I had the same error message.
1. Watch out you save the firmware on a small path like your c harddrive
2. Check the sice of your firmware...it has to be about 17 mb!!!! not like 300kb like mine had when i got that error message. If your´s does has about 300kb redownload it ...maybe with firefox or something else than IE
Hi folks,
first I would like to thank you all - especially kfurge for his great work.
I think now that the problem was that I did not wait long enough before I started the upload via the Asus firmware tool.
@kfurge (or anybody who knows):
When I log in as root, I always have to manually do this:
export PATH=/opt/bin:${PATH}
export LD_LIBRARY_PATH=/opt/lib:${LD_LIBRARY_PATH}
How can I implement this so that it standard ?
I saw these lines in the rc.local file but when I log in it's not activated :(
Do I have to make a .profile or profile file ? If yes, where do I need to put this file ?
I would appreciate if you or someone else could help me with that.
Regards,
Extreme
thx, kfurge - I'll try that.
regards,
Extreme
ANd where can I donwload it? Maybe I missed that part.... sorry!:confused:
http://home.comcast.net/~kfurge/wl700g.html
Search for profile. You'll have to rename the file on the website from profile to .profile.
- K.C.
Hi kfurge,
I am simply toooooooooo stupid.
Everything works fine except the .profile file.
Where do I have to put it ?
Seems that the WL-700GE ignores that it is there :(
Can't place it in /etc/ of course (where it should be in a standard system I think) and in /opt/etc/ it does not help yet ...
Regards and thanks in advance,
Extreme
mount -o bind /opt/etc/profile /etc/profile
I would also be very thanksful of an image file for the router of the custom firmware or if it comes, an dd wrt firmware :)
if anybody makes an image of the custom firmware, then please include everything like torrent etc.