About the CFE.bin for MN-700!
Thx for Oleg!!!
The CFE.bin provided by him work perfect!!!
Not all the computer's printer port works.
I've tried 4 computer. Only the old one works.
The dell and Hp won't work.
Backup the data b4 flash.
Because one of my computer can flash up to 4% then hang.
Then I used another compter to flash the backup and re-do again!!
I don't know why I can't gen my CFE.bin using nvserial.
Can I use Hexedit to edit another CFE.bin to my own MAC's CFE.bin??
Any chech-sum on it??
Any Linux system to use??
Thx!!!
Thx for Oleg!!
:-)
Can't go into restore mode
I don't know what to try anymore. I have no problem flashing the cfe except that I have to use the /noreset option. I have compared both files the only difference is there are a bunch of extra FFFFF at the end of the file I created with nvserial which I guess is just to fill any empty space on the chip. I have tried erasing the nvram and still no go. I have no lights when I restart the router except for 1 light that identifies where my ethernet cable is plugged in. Does anyone have any idea? Oh I did erase the kernel before I flashed the cfe I don't know if that is my problem. Can anyone create the cfe.bin for me just in case i'm doing something wrong? 00:0D:3A:28:C7:E4
Here is what I used with nvserial within Damn Small Linux
# Microsoft MN700 board
boardtype=bcm94710ap
boardnum=mn700
# 4710 CPU clock frequency in Mhz
# Only valid value is 125, anything else defaults to 100Mhz
clkfreq=125
# 4710 SDRAM controller parameters
sdram_init=0x0419
sdram_config=0x0000
sdram_refresh=0x8040
# 4710 MAC and PHY parameters
et0macaddr=00:0D:3A:28:C7:E4
et0phyaddr=30
et0mdcport=0
et1macaddr=00:0D:3A:28:C7:E4
et1phyaddr=5
et1mdcport=1
# PMON variables
dl_ram_addr=a0001000
os_ram_addr=80001000
os_flash_addr=bfc40000
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
scratch=a0180000
boot_wait=on
watchdog=3000
hardware_version=WL500-02-02-01-00
regulation_domain=0X30DE
Hope someone is still watching this thread :)
---------------------
UPDATE
---------------------
Oleg sent me new cfe.bin. Worked flawlessly.
Thank you