Bricked WL-500W Need JTAG Loyout
Hello,
It seems that I managed to brick my Asus WL-500W. Now I'd like to build JTAG cable but I can't find anywhere layout of the possible JTAG connections for this router. Can anybody help me with this?
You can answer also in German or Russian.
Thanks in advance!
WL500g Premium V2 and JTAG
Hi, is there a way to connect JTAG to the WL500g Premium V2?
1 Attachment(s)
How to JTAG and another trick
Thanks for the idea...I was considering that but haven't figured out the right hardware and connections to either serial or JTAG the hardware.
All I can find is that it does have a serial connection and (?) a JTAG in the compatibility spreadsheet for openwrt or dd-wrt.
But while I was looking for how to JTAG/serial I found someone with the identical problem who said
the "pin-9-pin-16-trick combined with a vcc-to-ground-hack" did the trick for him.
So I'm going to try that first. But if you can point me to a howto on serial or JTAG connection I'd still like to try that.
Attachment 8208
http://www.dd-wrt.com/phpBB2/viewtop...r=asc&start=45
Thanks,
Lou
serial info and vcc scaryness
I agree, vcc to ground sounds like an excellent way to overload PS, not something I want to do. I can only assume it power cycles the chip, which we have a reset for anyway.
No oscope anymore, but I'm sure I can figure out the TX/RX. Thanks for all the good info. Hope to try as soon as I order the max3232!
Lou
Need wl-500GP v1 JTAG pinout
Hi everyone,
:(
I need jtag pinout for wl-500gp v1,
The CFE is corrupt or deleted, and the RS232 console does not show anything when connected, and I do not have acces to a Flash programer or AVR.
Thanks in advance,
Renegate