doesn't seem to run after boot up

Printable View

25-01-2005, 09:08
norrisze

post-boot in /usr/local/sbin/ doesn't seem to run after boot up

Dear all,

I upgraded the firmware of my wl500g deluxe to the latest firmware v.1.9.2.7 CR3b by oleg. And I followed the instructions in the howto guide "WAN Webserver on port 80" to configure my post-boot with the following code.

mount /dev/discs/disc0/part1 /tmp/harddisk -t ext3
busybox_httpd -p 8080 -h /tmp/harddisk/web

After I bootup the router, I excuted the command ps. But the busybox_httpd was not found.

I tried to amend the post-boot as following:

touch /usr/local/sbin/abc
mount /dev/discs/disc0/part1 /tmp/harddisk -t ext3
busybox_httpd -p 8080 -h /tmp/harddisk/web

After bootup, the file /usr/local/sbin/abc was not found. It seems that the script post-boot was not executed at all.

Remark : I did chmod +x post-boot.

Am I doing anything wrong? May someone help me please? Thanks!
25-01-2005, 12:25
Oleg

Make sure your file starts with

Code:

#!/bin/sh
25-01-2005, 12:56
hugo

If firewall is enable, post-firewall is executed instead of post-boot
25-01-2005, 13:27
Styno

Quote:

Originally Posted by hugo

If firewall is enable, post-firewall is executed instead of post-boot

No. Both are executed.
25-01-2005, 14:38
norrisze

Thanks! It finally works.

Quote:

Originally Posted by Oleg

Make sure your file starts with

Code:

#!/bin/sh
14-02-2005, 21:14
Vaudtje

I'm trying to run stupid-ftp with a custom config, but I run into the same problem that post-boot is not executed (post-firewall is ignored as well).
In the web interface, FTP is disabled.
Some relevant output:

Code:

[admin@CPxxxxx-A /]$ cat /.version 1.9.2.7-3b [admin@CPxxxxx-A /]$ cd /tmp/local/init [admin@CPxxxxx-A init]$ cat post-boot #!/bin/sh /usr/sbin/stupid-ftpd -f /usr/local/stupid-ftpd.conf echo 'Post-Boot processed' > /var/log/post-boot [admin@CPxxxxx-A init]$ ./post-boot [admin@CPxxxxx-A init]$ [admin@CPxxxxx-A init]$ ls -lA -rw-r--r-- 1 admin root 174 Feb 14 20:32 .files -rwxr-xr-x 1 admin root 111 Feb 14 22:01 post-boot -rwxr-xr-x 1 admin root 71 Feb 14 22:01 post-firewall -rwxr-xr-x 1 admin root 36 Jan 15 21:46 pre-boot

If I run the post-boot manually (./post-boot), the log is created and the ftp daemon starts correctly.

What is missing?
15-02-2005, 09:01
hugo

post boot script must be in /usr/local/sbin/post-boot
15-02-2005, 09:02
hugo

Quote:

Originally Posted by Styno

No. Both are executed.

Sorry for my mistake, I had a typo in my post-boot script, and I activated firewall at same time!
I completly forgot about this message since then
18-02-2005, 17:19
Vaudtje

Quote:

Originally Posted by hugo

post boot script must be in /usr/local/sbin/post-boot

This is not what it said on the WIKI but it does seem to work a lot better. :)
Maybe someone who completely undestands what's in there can look at it to fix it there? I'm willing to give it a try but might introduce new errors...

Quote:

Originally Posted by http://wiki.wl500g.info/index.php/FlashfsBoot

Once the boot process has been altered you can use it to customize your router. A number of scripts in the /usr/local/init directory can be used for this purpose:
pre-boot
post-boot
post-firewall
18-02-2005, 19:42
Oleg

your script should be in the /usr/local/sbin, not init.