Bad system call with samba-3.0.14a

Printable View

04-10-2006, 22:31
demonv

Bad system call with samba-3.0.14a

Hi,

I installed samba - 3.0.14a using ipkg on WL500gp-1.9.2.7-7f-pre7.trx. But when i ran it i get bad system call message. Has anyone had this problem?
I got WD 160G external drive formated in ext3.

Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 2944 2944 0 100% /
/dev/discs/disc0/part1 153700384 623292 145269504 0% /tmp/harddisk
/dev/discs/disc0/part1 153700384 623292 145269504 0% /opt

This is my smb.conf

[global]
interfaces = br0
bind interfaces only = yes
workgroup = VDV
guest account = nobody
security = share
browseable = yes
guest ok = yes
guest only = no
log level = 1
max log size = 100
encrypt passwords = yes
dns proxy = no

[DATA]
path=/tmp/harddisk/My_Data
writeable = yes
browseable = yes
force user = admin

Partial strace output:

read(3, "\237\226\252,-\3\341\364\261x\21~", 12) = 12
fcntl64(4, F_SETLKW64, {type=F_WRLCK, whence=SEEK_SET, start=224, len=1}, 0x7fff7908) = 0
fcntl64(4, F_SETLKW64, {type=F_WRLCK, whence=SEEK_SET, start=164, len=1}, 0x7fff78b0) = 0
fstat64(4, {st_mode=S_IFREG|0600, st_size=16384, ...}) = 0
munmap(0x2ab00000, 16384) = 0
ftruncate64(4, 105553116266496) = 0
pwrite(4, "BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB"..., 1024, 4398046511104) = -1 EFBIG (File too large)
--- SIGXFSZ (Bad system call) @ 0 (0) ---
+++ killed by SIGXFSZ +++
Process 535 detached
05-10-2006, 08:44
oleo

Try new distribution for oleg firmware at http://ipkg.nslu2-linux.org/feeds/op.../cross/stable/

See http://wl500g.info/showthread.php?t=2036 for more info
06-10-2006, 21:09
demonv

Am I missing something?

I cant install any of the packages from here.

This is my ipkg.conf
src wl500g http://wl500g.dyndns.org/ipkg
src unslug http://ipkg.nslu2-linux.org/feeds/op...g/cross/stable
dest root /

When i do ipkg update it works fine, but when i am doind ipkg list i see old versions only.
if i manualy download packages they change name and i cant do anything with it.
07-10-2006, 22:37
demonv

I found my problem

I installed /opt on USB stick and reformated it in ext3.

Problem solved thanks so much.:)
13-12-2006, 09:45
acidbao

Quote:

Originally Posted by oleo

Try new distribution for oleg firmware at http://ipkg.nslu2-linux.org/feeds/op.../cross/stable/

See http://wl500g.info/showthread.php?t=2036 for more info

Hello, I had the same problem with Samba installed from the former unslung repository (3.0.14). But everytime i called a command like "net groupmap" or "pdbedit -a -u <username>", i had a "Bad system call" message.

So I updated the repository (http://ipkg.nslu2-linux.org/feeds/op.../cross/stable/) to get the 3.0.23 but now i have another problem, when I call any tool from samba (like net, wbinfo etc...) i have the message.

Code:

[root@routeur /tmp]$ net -sh: net: not found

Code:

[root@routeur /tmp]$ ls /opt/bin/ addgroup ldapwhoami smbcquotas adduser less smbget adduser-su lp smbmnt cancel lpoptions smbmount cups-config lppasswd smbpasswd cupstestdsc lpq smbspool cupstestppd lpr smbstatus dbclient lprm smbtar delgroup lpstat smbtree deluser net smbumount eventlogadm nmblookup ssh findsmb ntlm_auth su ipkg openssl tdbbackup ldapadd pdbedit tdbdump ldapcompare profiles tdbtool ldapdelete rpcclient testparm ldapmodify scp update-alternatives ldapmodrdn smbcacls wbinfo ldappasswd smbclient ldapsearch smbcontrol [root@routeur /tmp]$ /opt/bin/net -sh: /opt/bin/net: not found [root@routeur /tmp]$
13-12-2006, 13:38
oleo

ipkg install uclibc
13-12-2006, 14:28
acidbao

Thanks a lot
13-12-2006, 18:08
acidbao

Thanks a lot again now i dont need Debian anymore to run samba 3 and to make my WL500Gx a PDC:)