Óïðàâëåíèå UPS ïðè ïîìîùè apcupsd è nut

Quote:

---

Originally Posted by al37919

à â ëîãå îí åãî êàê òî âèäèò?

---

äà, êîíå÷íî, íî òîëüêî ïîñëå ýòèõ äåéñòâèé:
insmod hid (â 16 ïðåâüþ îí åñòü)
mknod /dev/usb/hiddev0 c 180 96

Feb 17 02:16:20 kernel: usb.c: registered new driver hid
Feb 17 02:16:22 kernel: : USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q5.I USB FW:q5] on usb1:2.0
Feb 17 02:16:22 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Feb 17 02:16:22 kernel: hid-core.c: USB HID support drivers

Êàæèñü íå õâàòàåò êàêîé-òî ìåëî÷è, íàâåðíîå âîò ýòîé http://wl500g.info/showpost.php?p=82014&postcount=14

Quote:

---

Originally Posted by Contemplator

äà, êîíå÷íî, íî òîëüêî ïîñëå ýòèõ äåéñòâèé:
insmod hid (â 16 ïðåâüþ îí åñòü)
mknod /dev/usb/hiddev0 c 180 96

Feb 17 02:16:20 kernel: usb.c: registered new driver hid
Feb 17 02:16:22 kernel: : USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q5.I USB FW:q5] on usb1:2.0
Feb 17 02:16:22 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Feb 17 02:16:22 kernel: hid-core.c: USB HID support drivers

Êàæèñü íå õâàòàåò êàêîé-òî ìåëî÷è, íàâåðíîå âîò ýòîé http://wl500g.info/showpost.php?p=82014&postcount=14

---

Ïîïðîáóéòå çàïóñòèòü ñ îïöèåé -u root. Íå çíàþ, êàê ïàêåò ñîáèðàëñÿ, íî ïî óìîë÷àíèþ äðàéâåð ìåíÿåò UID è GID ñ root íà nut, åñëè çàïóñêàåòñÿ ïîä root. Ýòî äåëàåòñÿ äëÿ áåçîïàñíîñòè. Ïîýòîìó ýòî ñêîðåå âñåãî ïðîáëåìà ñ ïðàâàìè äîñòóïà.
Ïîòîì ìîæíî áóäåò ÷òî-íèáóäü ïðèäóìàòü ñ hotplug.
È åùå äîáàâüòå -DDD, ïîñìîòðèì ëîã.

P.S. Íàñêîëüêî ÿ ïîìíþ, ýòîò äðàéâåð íå èñïîëüçóåò ÿäåðíûé hiddev, òîëüêî libusb. À çíà÷åíèå port â ups.conf èãíîðèðóåòñÿ.

Code:

---

[admin@router root]$ /opt/bin/usbhid-ups -a apc -DDD
Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1)

debug level is '3'
upsdrv_initups...
Checking device (0000/0000) (003/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0424/20CD) (003/002)
- VendorID: 0424
- ProductID: 20cd
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (002/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (001/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (051D/0002) (001/002)
- VendorID: 051d
- ProductID: 0002
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device matches
failed to claim USB device, trying 2 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
failed to claim USB device, trying 1 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
failed to claim USB device, trying 0 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
Unable to get HID descriptor (error sending control message: Operation not permitted)
HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 c0 04
HID descriptor length 1216
Unable to get Report descriptor: Operation not permitted
No appropriate HID device found
No matching HID UPS found

---

ýòî UPS:

Quote:

---

Checking device (051D/0002) (001/002)
- VendorID: 051d
- ProductID: 0002

---

ëîã íå ìåíÿåòñÿ, íåçàâèñèìî çàãðóæåí ÿäåðíûé hiddev èëè íåò

Quote:

---

Originally Posted by Contemplator

[admin@router root]$ /opt/bin/usbhid-ups -a apc -DDD
Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1)

---

Quote:

---

Originally Posted by Contemplator

Device matches
failed to claim USB device, trying 2 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
failed to claim USB device, trying 1 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
failed to claim USB device, trying 0 more time(s)...
detaching kernel driver from USB device...
failed to detach kernel driver from USB device...
trying again to claim USB device...
Unable to get HID descriptor (error sending control message: Operation not permitted)
HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 c0 04
HID descriptor length 1216
Unable to get Report descriptor: Operation not permitted
No appropriate HID device found
No matching HID UPS found

---

Íàëèöî ïðîáëåìà ñ äîñòóïîì, î êîòîðîé ÿ ãîâîðèë.
Íàäî áûëî äîáàâèòü è îïöèþ '-u admin', è '-DDD'. Ïîïðîáóéòå åùå ðàç òàê:

Code:

---

/opt/bin/usbhid-ups -a apc -u admin -DDD

---

Update.
Äà, âèäèìî ó âàñ íà ðîóòåðå íàäî äåëàòü '-u admin', à íå '-u root'.

Êàæèñü ÓÐÀ!!! ÑÏÀÑÈÁÎ!!!

Ñäåëàë /opt/bin/usbhid-ups -a apc -u admin -DDD >> /tmp/harddisk/abc
íî â abc ïîïàäàåò òîëüêî 1 ñòðîêà, êàê ñäåëàòü ÷òîá òóäà ïàäàë âåñü ëîã, õî÷ó âûñëàòü Âàì....

Quote:

---

Originally Posted by Contemplator

Êàæèñü ÓÐÀ!!! ÑÏÀÑÈÁÎ!!!

Ñäåëàë /opt/bin/usbhid-ups -a apc -u admin -DDD >> /tmp/harddisk/abc
íî â abc ïîïàäàåò òîëüêî 1 ñòðîêà, êàê ñäåëàòü ÷òîá òóäà ïàäàë âåñü ëîã, õî÷ó âûñëàòü Âàì....

---

òàê, íàâåðíî :)
/opt/bin/usbhid-ups -a apc -u admin -DDD >> /tmp/harddisk/abc 2>&1

Quote:

---

Originally Posted by Xander

òàê, íàâåðíî :)
/opt/bin/usbhid-ups -a apc -u admin -DDD >> /tmp/harddisk/abc 2>&1

---

:)
Íó ÷àéíèê ÿ - ÷àéíèê ñî ñâèñòêîì, âîò:

Quote:

---

Originally Posted by Contemplator

:)
Íó ÷àéíèê ÿ - ÷àéíèê ñî ñâèñòêîì, âîò:

---

Îñòàëîñü òîëüêî îòðåäàêòèðîâàòü upsd.conf è upsd.users (òàì âñå äîâîëüíî ïðîñòî), çàïóñòèòü upsd, ïðîâåðèòü, ÷òî âñå ðàáîòàåò, ñ ïîìîùüþ upsc, è, íàâåðíî, íàñòðîèòü hotplug, ÷òîáû ïðè ïîäêëþ÷åíèè UPS ñîîòâåòñòâóþùåå óñòðîéñòâî ñðàçó ïîëó÷àëî ãðóïïó nut.

Ïîòîì ìîæíî áðàòüñÿ çà upsmon, åñëè çàõîòèòå... Íî â ñëó÷àå ñ ðîóòåðîì ýòî, ïî-ìîåìó, íå àêòóàëüíî :) Ó ìåíÿ êîãäà-òî íà UPS-å âèñåë îäèí ðîóòåð ñ æåñòêèì äèñêîì. Ðàáîòàë ÷àñà 2 ïîñëå âûêëþ÷åíèÿ ïèòàíèÿ :)

Quote:

---

Originally Posted by angel_il

äîñòàë òàêè èç äàëüíåãî óãëà ÓÏÑ, ïîäêëþ÷èë, íàñòðîèë, îïèñàíèå ïðîöåññà çäåñü

---

Îòëè÷íî!!! Îãðîìíîå ÑÏÀÑÈÁÎ çà òðóä. ß òóò áåç óñòàíîâëåííîãî hid ìó÷àþñü, à îí îêàçûâàåòñÿ íóæåí... :D

çàïóñê ëþáîãî äåìîíà ñ ïðàâàìè ñóïåðþçåðà ýòî ìÿãêî ãîâîðÿ íå íàø ìåòîä, íî ïðîñòî íå õîòåëîñü äåëàòü ëèøíèõ òåëîäâèæåíèé, õîòÿ òàì èõ è íå òàê ìíîãî íàäî... äîáàâèòü ïîëüçîâàòåëÿ, ïîìåíÿòü ïðàâà íà hiddev, ïîìåíÿòü ïðàâà íà ïàïêó ãäå ñîçäàåòñÿ ñîêåò.

Äà, è åùå âîïðîñ, îòíîñèòåëüíî mkdir /var/state/ups.
Êàê Âû äóìàåòå, ìîæåò ñòîèò åå ðàçìåñòèòü ãäå-íèáóäü íà âíåøíåì íîñèòåëå (USB-ôëýøêå èëè âèíòå), usbhid-ups ïèøåò òóäà ïîñòîÿííî, ìíîãî è ÷àñòî...
Èëè /var/state/ups ýòî ÎÇÓ (RAM)?

Ñêîìïèëèë ÷åðåç optware ñëåãêà áîëåå ïîëíûé âàðèàíò ñî ñëåäóþùèìè îïöèÿìè:

PHP Code:

---

                --with-udev-dir=no \
                --with-serial \
                --with-usb \
                --with-lib \
                --with-snmp \
                --with-cgi \
                --with-cgipath=/opt/share/www/cgi-bin \
                --with-htmlpath=/opt/share/www/html \ 


---

Äîáàâëåí òàêæå ñòàðòîâûé ôàéë îò angel_il

ipk ïðèàòòà÷èë. Æåëàòåëüíî è åãî ïðîòåñòèòü. Îäíàêî, ïîõîæå, ÷òî äåéñòâèòåëüíî ýòà øòóêà ðàáîòàåò. Åñëè ìîé ipk â ïîðÿäêå, òî ïîðà îòïðàâëÿòü îëåî?

2Xander:
IMHO â configure áàã â ÷àñòè ïðîâåðêè ãäå íàõîäèòñÿ libssl . Äåëàåòñÿ ïðîâåðêà ïðèìåðíî ïÿòè ñòàíäàðòíûõ ìåñòîïîëîæåíèé è íå äåëàåòñÿ ïðîâåðêè â ìåñòå çàäàííîì þçåðîì (íàïðèìåð, ñ ïîìîùüþ CFLAGS è LDFLAGS).  íàøåì ñëó÷àå libssl íàõîäèòñÿ çäåñü: ~/optware/oleg/staging/opt/lib , ò.å. â íåïðåäñêàçóåìîì ìåñòå.

Íàèáîëåå ïðîñòî ïðîáëåìà ëå÷èòñÿ òàêèì ïàò÷åì, õîòÿ ëó÷øå áû åùå îäíó ïðîâåðêó äîáàâèòü:

PHP Code:

---

--- configure.orig      2007-12-21 15:00:49.000000000 +0300
+++ configure   2008-02-20 00:25:02.000000000 +0300
@@ -25307,8 +25307,8 @@
       CFLAGS_ORIG="${CFLAGS}"
    LDFLAGS_ORIG="${LDFLAGS}"

-   CFLAGS=""
-   LDFLAGS="-lssl -lcrypto"
+#   CFLAGS=""
+#   LDFLAGS="-lssl -lcrypto"

    cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */ 


---

Oleg, åñëè íå ñëîæíî ñîáåðèòå hid.o äëÿ ïðåâüþ *.8.17, î÷. íóæíî (äîñòàë èç çàãàøíèêà APC500) :)

äîñòàë òàêè èç äàëüíåãî óãëà ÓÏÑ, ïîäêëþ÷èë, íàñòðîèë, îïèñàíèå ïðîöåññà çäåñü

Quote:

---

Originally Posted by al37919

Ñêîìïèëèë ÷åðåç optware ñëåãêà áîëåå ïîëíûé âàðèàíò ñî ñëåäóþùèìè îïöèÿìè:

---

ñåãîäíÿ ïîáàëþóñü...

al37919, â Âàøåì ïàêåòå ñîäåðæèìîå S50nut îêàçàëîñü òàêèì:

Code:

---

#! /bin/sh

#This is an example startup script intended to be used with APC BACK UPS CS-XXX (USB)
#Modify it to suite your particular UPS. Read documentation here: http://www.networkupstools.org/
#Don't forget that before using it you have to insmod hid.o (get correct file for your kernel)

prefix="/opt"
PATH=${prefix}/bin:${prefix}/sbin:/sbin:/bin:/usr/sbin:/usr/bin
NAME_H=usbhid-ups
NAME_D=upsd
DAEMON_H=${prefix}/bin/${NAME_H}
DAEMON_H_OPTS="-a ups -u admin"
DAEMON_D=${prefix}/sbin/${NAME_D}
DAEMON_D_OPTS="-u admin"

echo $DAEMON_H
echo $DAEMON_D

test -x $DAEMON_H || exit 0
test -x $DAEMON_D || exit 0

if [ -z "$1" ] ; then
    case `echo "$0" | sed 's:^.*/\(.*\):\1:g'` in
        S*) rc="start" ;;
        *) rc="usage" ;;
    esac
else
    rc="$1"
fi

case "$rc" in
    start)
        if [ -n "`pidof $NAME_H`" ]; then

#!/bin/sh

prefix="/opt"
PATH=${prefix}/bin:${prefix}/sbin:/sbin:/bin:/usr/sbin:/usr/bin
NAME_H=usbhid-ups
NAME_D=upsd
DAEMON_H=${prefix}/bin/${NAME_H}
DAEMON_H_OPTS="-a ups -u admin"
DAEMON_D=${prefix}/sbin/${NAME_D}
DAEMON_D_OPTS="-u admin"

echo $DAEMON_H
echo $DAEMON_D

test -x $DAEMON_H || exit 0
test -x $DAEMON_D || exit 0

if [ -z "$1" ] ; then
    case `echo "$0" | sed 's:^.*/\(.*\):\1:g'` in
        S*) rc="start" ;;
        *) rc="usage" ;;
    esac
else
    rc="$1"
fi

case "$rc" in
    start)
        if [ -n "`pidof $NAME_H`" ]; then
            echo "$NAME_H allready started.... id: `pidof $NAME_H`"
            echo "use 'restart' option for restart"
        else
            echo "Starting $NAME_H: ..."
            $DAEMON_H $DAEMON_H_OPTS
        fi
        if [ -n "`pidof $NAME_D`" ]; then
            echo "$NAME_D allready started.... id: `pidof $NAME_D`"
            echo "use 'restart' option for restart"
        else
            echo "Starting $NAME_D: ..."
            $DAEMON_D $DAEMON_D_OPTS
        fi
        ;;
    stop)
        if [ -n "`pidof $NAME_D`" ]; then
            echo "Stopping $NAME_D: ..."
            killall $NAME_D 2> /dev/null
        fi
        if [ -n "`pidof $NAME_H`" ]; then
            echo "Stopping $NAME_H: ..."
            killall $NAME_H 2> /dev/null
        fi
        ;;
    info)
        if [ -n "`pidof $NAME_D`" ]; then
            echo "$NAME_H is active.... pid: `pidof $NAME_H`"
        else
            echo "$NAME_H is not running"
        fi
        if [ -n "`pidof $NAME_D`" ]; then
            echo "$NAME_D is active.... pid: `pidof $NAME_D`"
        else
            echo "$NAME_D is not running"
        fi
        ;;
    restart)
        "$0" stop
        sleep 1
        "$0" start
        ;;
    *)
        echo "Usage: $0 (start|stop|restart|usage|info)"
        ;;
esac
exit 0

---

À â îñòàëüíîì ïðîñòî - ñóïåð. Âñå ðàáîòàåò. Ñïàñèáî!

à â ÷åì ïðîáëåìà ñ ýòèì ñêðèïòîì?
êðîìå òðåõ ñòðîê êîììåíòàðèÿ âíà÷àëå, êîèõ àâòîð ÿ, îñòàëüíîå òî÷íàÿ (ÿ íàäåþñü) êîïèÿ ñêðèïòà îò angel_il ñ ïåðâîé ñòðàíèöû ýòîé òåìû. Åùå ÿ ïðèäóìàë 50 â S50nut... Íî âåäü êàêèå òî öèôðû íóæíû æå :)

Êñòàòè, ïîñêîëüêó äàííûé ñêðèïò åñòü òîëüêî ïðèìåð, ÿ ðåøèë åãî ïåðåèìåíîâàòü â s50nut, ÷òîáû ïðåäîòâðàòèòü àâòîìàòè÷åñêîå èñïîëíåíèå áåç âäóì÷èâîãî àíàëèçà.