No ip from DHCP

I got Firmware v1.9.2.7. I don`t get a ip from the DHCP (WL-500g), get a automatic ip is on (win xp pro). My home network is 1 pc wired en and 1 wireless. The wireless one don`t get a ip. Who can help me :confused:

TinChin

Adjust your wireless security settings. Use WEP or WPA-PSK with TKIP only.

ok I will try. Thanks

TinChin

Still haven`t a ip-adress :mad:

TinChin

assign static, if it won't work check keys and stuff

Have try static ip with no security, still can`t acces the network. I try almost everything but nothing will help :confused:

TinChin

Firewalls active on your workstation (XP SP2) or router?

Both at non-active, have xp sp1.

TinChin

update your router to latest firmware,
reset router to defaults

please upgrade wireless card drivers if possible (remove driver first before upgrading)

try again with no modifications to your router configuration
and please use Windows Zero Configuration

That don`t work. Can it be the WL-138g (pci card) the problem is? I read reviews about isn`t so good.

TinChin

Hi,

I experienced the same problem since I upgraded from firmware 1.9.2.7-1 to 1.9.2.7-3a. Tried all I could think of, but when I went back to 1.9.2.7-1, all worked fine again. Maybe you should try an that as well.

Good luck!!!

Peter

and indeed please also try another card as you are using wl-138g thing

to tinchin
I experienced the same problem since I upgraded from firmware 1.8.2.4 to 1.9.2.7-3a (1.9.2.7-3b)
Look at (http://wl500g.info/showthread.php?t=1505)
I think problem i this:
1.9.2.7-1 (2004-12-17) WPA2 & WME disabled for now
1.9.2.7-2 (2004-12-26) WPA2 & WME enabled, but WPA is not fully functional

If you need 1.9.2.7-3* use WEP-128bit (it should be noteâ - 60 sec!!!!!!!!!!! to get IP from DHCP)
or downgrade to 1.9.2.7-1 (1.8.2.4)

Thanks everyone!

Got it fixed now. I've just changed the encryption to 64-bits and thus gained 4 new WEP-keys, copied them to the encryption settings of the other pc and works fine. And update firmware to 1.9.2.7-3b.

TinChin