PDA

View Full Version : Need help, crashed wl-500gx



readhead
22-03-2006, 02:04
Hello out there!

I have some curious probs with my wl-500gx.

When I played around with dnsmaq suddenly the router reboots and I can't reach it anymore.

I thought no prob, push reset an all is OK, but it wasn't.
OK, then flash it, and all is fine (I thoght), but it wasn't.

To find out the IP, I started Etheral and I getting following results:


Port 1-4:
sending out "spanning tree for bridges" with IP 192.168.1.1

with some firmwares there are also ARP requests from 192.168.1.1 "who is 192.168.1.1?"

WAN:
DHCP Request

In Recovery mode it has the IP 192.168.50.49 and sending out ARP "who is 192.168.50.49?"

Looking a bit deeper in the sended packages, I saw that in the Ethernet II part the IP is 192.168.1.1 but in IP 192.168.50.49

I tryed different Firmwares (including nvram-clear & restore, Asus, old, new,...) but nothing helps, I can't connect (no ping, ssh,telnet,http).

I tryed to assign a IP on the WAN port, that works, but I cant ping it.
The Firmware Upgrade always seems to working well.

After trying almost every tip I could find of resetting the router I don't know what to do.
It seems that some things resist in the nvram, and the Ip's are very curious for me.

THX a lot for any suggestions to bring it back to life


P.S. some time before it crashed I created a vlan for port 4, but that worked well, dosen't know if it is important.

readhead
23-03-2006, 13:26
It's back to life!!!

after many tryes it works now again!

After upload of WL500gx-1.9.2.7-7c.trx and two days disconnectet from power I became a dhcp-lease from 192.168.1.1 an all is fine now.:) :) :)

But I still want to know, how this wired tcp-paket could be.

Greets

readhead