Printer problem with Oleg's firmware

[lolka]

Hi!

I have a wl-500gx with firmware 1.9.2.7-6b.
I use it with a Samsung ML-1510 and I can't print.
This is strange, because I could print with the original asus firmware.
I upgraded to Oleg's to have http server/samba etc... but now I cannot use the printer.
It seems, that the router recognizes the printer and says, it is online.
But printing fails, XPs print manager says that the printer is busy.
[I tried printing through the usb of a PC of course, so the printer is good.]

Have anyone faced with such problem?
Is there a solution?

Thanks in advance

lolka

ps: if I opened this thread in wrong section, I'm sorry. I thought this is related to custom firmware problem.

[Oleg]

Do you use USB or parallel connection?
Do you use RAW option?

[lolka]

Thanks for moving and for fast reaction. :)

I use USB connection.
About RAW...well, I don't know. How/where can it be checked?

[Oleg]

http://oleg.wl500g.info/printing/

[lolka]

Uh, I should have read before asking...:rolleyes:

Sorry, and thanks for the answer. :)

[ciderbooze]

hi
i have managed to set my wl500g up just the way i want it using firmware 1.9.2.7.-6b. i have one problem though and that is printing via the wl500g lpt port. i have followed the instructions as linked to above and although i am using windows xp the procedure appears to be the same. if i print a test page the windows driver pops up to tell me the print progress )which rapidly moves to 100%) and the ink levels but nothing is printed and no error is returned. if i look in the status and log page of the wl500g the printer is listed with a status of online. any help would be gratefully recieved

thanks

[Oleg]

You've to select 9101 as the RAW port.

[ciderbooze]

thanks for the help that worked for me.