i have problem ftp server neufbox trio 3d /asus wl500G

[speedoone]

hello i have french, i speak little english


we can send your CFG file (admin routeur and system setup and setting management) if we have ftp server on port usb!!!!

my modem is router/modem and he use DHCP (he not use ip fixe)

my modem is ip :192.168.1.1
and my router ip:192.168.1.2 and 192.168.0.1 (and use ip static)
i have desactive my firewall wl500g (enable firewall =>NO)
my firmware is 1.9.4.0 (asus site)

my problem is, i can't access outside my ftp!! but i can access in local network

when i try to connect outside in ftp, i have message "connection time out"

please help me, send file CFG or write the answer.

thank you for help

[ATH]

I'm not sure that I understand your network configuration.

your modem is used as a router and has 192.168.1.1 for internal ip, and wl-500g is the ftp server with lan ip 192.168.1.2 ?
but what is 192.168.0.1 ?

if this is the case, you just need to map port 21 from your modem/router to the wl-500g's internal ip address.
Search for a function named "Port forwarding or Virtual Server" on the administration console of your modem, and map port 21 to ip 192.168.1.2.
Check also if the firewall of your modem doesn't block port 21.
And be sure to connect your router on the lan interface of the wl-500g.

[speedoone]

192.168.0.1 it is ip for my local network (2 pc)


you have not file CFG for me?because it is easy after for me!!!

[speedoone]

I have tested my security
http://www.zebulon.fr/outils/scanports/results_qt.php?TCPo=443&TCPc=21,22,23,25,79,110,113,119,135,139,143,389,44 5,1002,1024,1025,1026,1027,1028,1029,1030,1720,500 0&TCPi=80&tmp_exec=1.78

my port 21 is closed!!!!

but my port 80 is mask...

my port 443 ils open

[tophinus]

You must open the port 21 as port forwarding on your 9box. If i remember, go to "Reseau" and then "NAT/ ???" and open the 21 port for 192.168.1.2. Now it should works i think

[ATH]

192.168.0.1 it is ip for my local network
But you said that it is your modem that is used for routing.
So you should not have an IP with a different subnet mask for your local network, and it should be something like 192.168.1.X. (with x > 2)

By the way I can't send you a CFG file because i said you earlier that the problem comes from your network configuration and from your modem configuration, not from the wl-500G.
Refer to my first post.