View Full Version : USB seitec 256MB, problem
Hi,
i connect new USB device (seitec 256 MB) to the wl 500b.
Kernel wrote (in booting):
Jan 1 01:00:06 kernel: usb.c: USB device 2 (vend/prod 0x58f/0x6386) is not claimed by any active driver.
i used last oleg firmware
any idea
wireless
27-08-2005, 21:18
Not that it will directly help you, but:
I have the same usb stick (although the vendor/product id does differ; see attachment for an image of the stick) and it works perfect with my 500g.
In my log file I also see "not claimed by any active driver", but a few log entries later the device is recognized and configured properly.
Jan 1 01:00:07 kernel: usb.c: USB device 3 (vend/prod 0x457/0x151) is not claimed by any active driver.
Jan 1 01:00:07 kernel: usb.c: registered new driver usblp
Jan 1 01:00:07 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:09 kernel: usb.c: registered new driver audio
Jan 1 01:00:09 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 01:00:09 kernel: Linux video capture interface: v1.00
Jan 1 01:00:10 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:10 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:10 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:10 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:10 kernel: Vendor: USBest Model: USB2FlashStorage Rev: 0.00
Jan 1 01:00:10 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 01:00:10 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 01:00:10 kernel: SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
Jan 1 01:00:10 kernel: sda: Write Protect is off
Jan 1 01:00:10 kernel: Partition check:
Jan 1 01:00:10 kernel: p1 p2
Jan 1 01:00:10 kernel: USB Mass Storage support registered.
thx for reply,
but ...
1) different error (id) :)
2) i have stick with black colour and blue light :)
and dont know what else ... :)
Not that it will directly help you, but:
I have the same usb stick (although the vendor/product id does differ; see attachment for an image of the stick) and it works perfect with my 500g.
In my log file I also see "not claimed by any active driver", but a few log entries later the device is recognized and configured properly.