USB Printer access from WAN

[hh007]

Hi,

I have a HP Deskjet 3320 which works fine within the LAN network but how can i access the printer from the WAN site?

My Setup

Hardware firewall connected to the WAN of the ASUS WL-500G deluxe in this subnet there are 2 clients connected to the Hardware firewall. The 500G is running in gateway mode to enable all functions. I have also forwarded the port 9100 to the LAN IP of the 500G but still the printer is not accessible.

Any ideas or instructions?

My Firmware: ASUS BETA 1.9.4.0

Thanx
hh007

[Oleg]

Allow LPR Access from WAN bla-bla-bla or something like this in the web interface.

[hh007]

thank you oleg, this does the trick.

For later reference

There is no need to setup any port forwarding.

The only thing needed is to enable Respond LPR Request from WAN? in the Internet Firewall - Basic Config settings.

Regards
hh007

[Oleg]

Sure, next time just RTFM.