PDA

Bekijk de volledige versie : wl500g - how get setting from AP???


pinceau
02-06-2005, 14:49
Hi,
I need some help with settings of my wl500g. I have firmware 1.9.2.7-5a.
I would like to connect to AP, but AP gets automaticly IP etc. to my ASUS.
I don`t know how to set my wireless connection on ASUS.
I put some screens at http://pinceau.wz.cz.
Can anyone help?

Thanks in advanced
pinceau
Antiloop
02-06-2005, 15:23
? what do you exactly want?

draw your network please (use visio or something)

and specify exactly what you want
pinceau
02-06-2005, 18:49
There is AP (SSID: CZFree.Net.Tone) and the AP assigns (generate) automaticly IP to my router. Behind the router I have 2 PC`s with IP (192.168.1.20 and 192.168.1.30). Router has default IP for LAN (192.168.1.1). DHCP for LAN is disabled.
So I need receive an IP for my router from AP.
I don`t know how to reach this settings.

Is it clear now?
Styno
02-06-2005, 21:14
I think you should setup the router as 'home gateway router'.
pinceau
03-06-2005, 09:37
'home gateway router' is a default setting
Styno
03-06-2005, 09:56
'home gateway router' is a default setting
Yes? What's your point?

Edit: Oh sorry, I see now what you mean. You want to be a client of an AP. Completely missed that. Anyway I think you need to setup your router in WDS mode in this case.
pinceau
03-06-2005, 10:48
Can I sen you a results from Telnet?
ifconfig, route, wl status, iptables -L -v?
pinceau
03-06-2005, 10:52
? what do you exactly want?

draw your network please (use visio or something)

and specify exactly what you want

look at the network
Styno
03-06-2005, 15:08
Can I sen you a results from Telnet?
ifconfig, route, wl status, iptables -L -v?
Not to me, I wouldn't know what to do with that :o

I think you should grab your users manual and follow the instructions for setting up the router in WDS mode. That should get you up to speed.
Oleg
03-06-2005, 20:06
No WDS is required, just switch wl500g to the client mode. Select Ethernet Bridge or Station in the Wireless Extended Mode field.
pinceau
03-06-2005, 20:55
No WDS is required, just switch wl500g to the client mode. Select Ethernet Bridge or Station in the Wireless Extended Mode field.
This setting I had... But I could not find my AP. In Status-Wireless there is one MAC address but in Status-IP I could not receive any IP from AP...
Oleg
04-06-2005, 08:30
Do you use WEP? If so, use HEX wep key, not passphrase.